Search Results for "storage"

Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li

...: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. Gem fonts and true type fonts complement each other perfectly - gem fonts are small and fast, while true type fonts are device and resolution independent so are scalable to any point size at any resolution.

Generic SCSI target subsystem for Linux SCST allows creation of sophisticated storage devices. It includes generic SCSI target core with SCSI target drivers and backend handlers. There are target drivers for iSCSI, Fibre Channel, SRP, SAS, FCoE, etc.

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

Alternative attempt to develop linux driver for TI FlashMedia xx12/xx21 storage controllers.

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

Multiplatform and Multiprotocol driver for QLogic Host Bus Adapters. Runs on Solaris, NetBSD, FreeBSD and Linux. Support both initiator and target mode. Supports QLogic 1020 SCSI through Qlogic 25XX FC cards.

Virtual Tape Library using iSCSI. Allows the user to create a tape library emulation complete with robot, tape drives and tapes on a Linux Server. Release 2 and better documentation now available.

dp1234

This project tries to provide an interface to use the Samsung Mobile phone SGH-P200 under GNU/Linux systems.

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

Osst is a Linux tape driver for the OnStream SC-30/SC-50 and (via the SCSI layer adapters ide-scsi, usb-storage and sbp2) the IDE-30, USB-30 and FW-30 tape devices. A kernel driver has been created to provide an st-compatible interface to the userspace.

BDwrap is a template for writing stackable block device drivers on Linux. It's clean interface hides the complexity of device handling, asynchronous calls, buffer cache interaction, etc. It is a great tool to develop stacked block drivers quickly.

There are popular tape device ArVid which based on ordinary (PAL/SECAM) VHS & ISA board with PLM which often used in Russia and xUSSR. ArVid board are controled by VHS behind integrated multisystem IRC node. I've coded raw driver for this device. Driver

Ftape - the Linux kernel floppy tape driver

This is a standard, non-accelerated network driver for Alacritech's Server and Storage Accelerator.

Linux device driver and utilities for the Backer video tape backup device manufactured by Danmere (now 4-TV).

A combined hardware/software project to provide MMC/SD card reading/writing facilities to any device with an RS232 serial port. Intended initially for Palm devices with no built in storage expandability (III series, V series etc.).

HBAVERIFY project is developing a C-based application for testing the Fibre Channel Host Bus Adapter (HBA) API, developed through the Storage Networking Industry Association (www.snia.org).

Libsdi ecapsulates the Serial Attached SCSI Device Interface (SDI) for Linux. Storage management applications can then use the API provided by this library to support multiple vendors SAS controllers on both 2.4 and 2.6 Linux kernels.

Tool for controlling the M-Systems mDrive 500(formerly DiskOnKey) secure USB storage chip, as used in the Kingston DataTraveller Elite, Intuix S500 and similar devices.