Search Results for "parallel port automation"

...Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. ...

libieee1284 is a cross-platform library for parallel port access.

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

Parapin makes it easy to write code under Linux that controls individual pins on a PC parallel port. This kind of control is very useful for electronics projects that use the parallel port as a generic digital I/O interface (instead of as a printer port)

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

An open-source Windowslibrary for low-level parallel port access. Does not require installation of any drivers. Emulates API of most commonly used solutions.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

geniusvp2 is a SANE (http://www.sane-project.org/) backend for the GeniusŽ ColorPage-Vivid Pro II flatbed scanner. Currently, only the parallel port version is supported.

FIPP 4L is to provide a linux kernel driver and C library, which allow programming the Fischertechnik (R) parallel port interface (product ID 30520) in an easy way.

This project is aimed to porting ppbus (the parallel port abstract bus found in FreeBSD) to the NetBSD Operating System. This will allow using faster devices with NetBSD and will add IEEE 1284 support.

This program allows the user's laptop to act as a trip computer displaying fuel economy, speed, and other information about a car which is connected through a hardware device to the parallel port.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

A general driver for controlling a HD44780 (and compatible) Microcontroller over the pc parallel port or any i/o device. This kind of microcontroller is typically used in LCDs (liquid crystal displays).

The main purpose is to develop a Linux stepper motor driver module to drive two unipolar stepper motors using the parallel port. This driver has the task to enable a home-made robot to move around and uses the tank-principle to move and turn.

lcdmod is a linux device driver for controlling HD44780 comatible LCD panels attached to the parallel port. It supports user generated fonts, multiple wiring schemes, multiple display sizes, and multiple driver chips. It has visualisation and control plug