Search Results for "linux serial"

Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li

Compatibility library/layer for USB (serial-type) to GPIB interface, a C-based library with Linux-GPIB and NI-type library calls such as ibrd() and ibwrt(). Includes LabView VIs modeled on those in the standard 488 interface l Works with/compiled for Linux and Windows

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

Library and userspace programs to control Samsung SyncMaster/MXn, Sony PUD, and other monitors from software, using the monitor-specific serial protocols.

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

This is a Linux 2.6 driver for ISA, PC-104 and serial Indramat (aka BoschRexroth) CLC cards for SERCOS motion control. http://www.boschrexroth.com/country_units/america/united_states/en/products/brc/ProductDocumentation/LegacyProducts/Controls/index.jsp

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

X10 device drivers for Linux creating a /dev device for each X10 unit in the house. This allows command line, script, and program access to the X10 network.This driver currently supports the PowerLinc Serial, PowerLinc USB, and CM11A.

This library provides an interface to communicate with Extralink (XA) packs over serial connexions. It is written in C/C++ and implements for Linux the same functionalities as the XA.dll library provided by Sidena for MS Windows.

A portable library to access braille displays.

A low cost software and hardware KVM over IP and remote Console monitoring solution running on Linux. Secure administration and access to remote keyboard/video/mouse and serial console output. Easily configured and customised to suit user needs.

Open source VISA complient (Virtual Instrument Software Architecture) library written in C for Linux/Unix operating systems to control instruments through Serial, GPIB... It will use the linux-gpib project to access the GPIB boards.

Development area for GNU/Linux 2.6.x for the KS8695 ARM SoC. Covers kernel patches, drivers for serial, Ethernet, PCI, GPIO, watchdog subsystems, and drivers for optional PCI based devices such as USB, WiFi, WiMAX, IPSec, SSL, and RSA devices.

RSMeter is a package for interfacing to the RadioShack/Metex 22-168A series of serial-connected multimeters. Currently, it includes an ncurses interface and a script to graph readings. Support for other meters is planned in the future, with an API.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

Additional information and patches for a FTDI USB/Serial converter device driver for linux 2.6.x kernels.

A general-purpose driver for the Zetron Model 16 paging encoder, written for the Linux platform. It was written on RedHat Linux 6 and also compiled on Mandrake 7.1

Libsdi ecapsulates the Serial Attached SCSI Device Interface (SDI) for Linux. Storage management applications can then use the API provided by this library to support multiple vendors SAS controllers on both 2.4 and 2.6 Linux kernels.