Search Results for "device drivers"

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). ...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

This is the development site for frame buffer video drivers and video subsystem for Linux.

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

Software for a van eck phreaking device. Please use to test security only. <a href="http://searchsecurity.techtarget.com/sDefinition/0,,sid14_gci550525,00.html">Here</a>'s an explanation if you don't know what van eck phreaking is.

A general driver for controlling a HD44780 (and compatible) Microcontroller over the pc parallel port or any i/o device. This kind of microcontroller is typically used in LCDs (liquid crystal displays).

A combined hardware/software project to provide MMC/SD card reading/writing facilities to any device with an RS232 serial port. Intended initially for Palm devices with no built in storage expandability (III series, V series etc.).