Search Results for "daemon"

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly...

CuteMouse is a DOS based mouse driver, fully written in assembly language. It's optimized for size (and speed) to allocate as small as possible amount of your precious 640KB RAM. It currently supports serial and PS/2 mice and, if BIOS support present an

EasyFlash is a flash memory cartridge for the Commodore 64 with multiple configurations and banks possible. Since it does not use traditional UV-EPROMs but Flash memory, it is possible to "burn" the cartridge using your C64. No EPROM programmer is needed.

This is a DOS driver to access CD/DVD in Optical Disk Drive used on Intel Desktop boards during bootup to MS-DOS.

TINI-Flash provides Flash file system support, class libaries and utilities for the Dallas Semiconductor TINI embedded Java computer. Currently Flash support is provided as FileSystemDriver class (integrtable into SLUSH) and as command line utilities.

Project purpose: emulating a disk drive which information will be stored in a database through network.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

Lightget is an open hardware and open software project to build computer controlled systems with LEDs and/or other light sources. The ultimate goal is to provide illumination and visual entertainment in a convenient, low-cost solution.