Search Results for "remote-server"

Arduino Mega 2560 Code to that supports a standard Ethernet Shield . i.e. Drive Relays hence outputs to MFJ-993b. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine...

Echoes it's a radio spectral analysis software for SDR devices, designed for meteor scattering purposes. The older releases supported only RTL-SDR devices. They are very cheap SDR based on DVB-T TV tuner dongles based on Realtek's RTL2832U chipset. Starting from 0.50 Echoes embeds SoapySDR allowing the support of many other SDRs. Echoes doesn't demodulate neither decode any human-made signal. Its main goal is to analyze and record the total power of natural signals and generate...

Two programs: (1) MorseNews sends news from one or more RSS, Atom, or Twitter feeds as Morse code, and (2) MorseKeyer, an iambic/bug keyer with mouse & serial key/paddle. Both play CW or sounder audio and drive external sounder, loop, or ham rig. See http://morse-rss-news.sourceforge.net/

************************************* UPDATE ******************************* This project has been divided in two parts: - GUI for cw through cwdaemon, with improved specs / customization [CWdaemonGUI] - GUI rig control [Microrig GUI] The packages are ready as .zip folders in the File section. Enjoy :-) ****************************************************************************** "Remote HF Operation" it's now a reality! With this app it's possible to send CW, with CWdaemon...

THIS SOFTWARE IS BETA STAGE - PLEASE MONITOR CLOSELY DURING OPERATION & BE PREPARED TO TAKE MANUAL CONTROL OF FLDIGI! When used with Fldigi and a multiband antenna, this tool largely automates the task of testing up to five HF frequencies between two sites. Briefly, one site is configured as a remote site and the other as net control. The remote site transmits a brief text message on each of the five designated frequencies, starting at a prearranged time. The designated net control...

Mirror directly approved by Phil Karn, KA9Q. The KA9Q NOS TCP/IP package began life way back in 1985 on a surplus Xerox 820 computer board running CP/M with a 4 MHz Zilog Z-80 CPU, 64KB of RAM and a 8" floppy drive holding all of 243KB. Later, it moved to the IBM PC with the 8088 and 80286 CPUs running MS-DOS. KA9Q NOS was only the second known implementation of the Internet protocols for low-end computers. Unlike PC/IP, KA9Q NOS could simultaneously act as an Internet client, a server...

Remote industrial terminal indicator to the control of Modbus-RTU on Atmega128. Publication of "MODBUS on a leash. Remote industrial indicator. - Radiolybitel, Minsk, 2009, № 7, p.46" (series of articles http://radioliga.com). Project for IAR.

This is an unofficial Bollywood Hungama Radio Channel for desktop. With this application you can listen to most popular radio channel in India by Bollywood Hungama. This application use Live365 Radio as streaming server. I made this application as a test application for my unofficial project on online radio. If you find any bug or any issue using this software you can give me your feedback on my site http://www.tricksbyaks.co.cc or you can also email me on this address uraks456...

Rigserve implements a human-readable control language for remote or local IP access to amateur radio equipment (rigs). A Python class library allows interfacing with a large number of rig types via serial ports or other methods.

With UnidenCommander (UC) you can remote control Uniden Bearcat radio scanners through a RS-232 connection. UC currently supports the Uniden UBC785XLT scanner, and support for the UBC780XLT is in an experimental state.

Creates a server on a TCP port which collects and broadcasts APRS packets to other programs. Utilizes the serial port to accept data via radio as well as gps. Can retrieve data via aprs.fi & APRS-IS. Can beacon if both gps &radio are connected.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

Java libraries implementing RCIP Remote Control Interface Protocol and PCIF CCDump Monitoring for the GRE PSR-500, PSR-600 and Radio Shack PRO-106, PRO-197 Advanced Digital Trunking Scanners.

LogPad is a Ham Radio logging program like LogEQF this one runs on Windows its programmed in Delphi. It has a feature to lookup callsigns on the internet and it can view a grid of the logbook and save it in HTML.

RadioMaster is an interactive radio. The clients could propose songs or play list and the server will broadcast it to the registered clients.

Tampa Network Operating System (TNOS) is an Amateur Radio application providing a BBS, chat, and many other internet servers. It has been in development since 1991 and is used world-wide. The current release (3.0) is ONLY available (at this time) via

ham radio repeater software controlled controler run your own repeater without expensive hardware just your computer and transcievers made for linux/unix we need help creating this so please email me at kc8yho@kc8yho.org to join in.

APRS Comprehensive Mapping Server

Cross Platform GUI front end for the Hawkvoice Codecs, Written in wxPython. Primary intended use is for low bandwidth speech such as HamRadio or AM broadcast. Server/Client style. for Win32/OSX/Linux platforms.

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.