Search Results for "send"

Block that receives a " message" and send string values over serial connection, to control hardware devices ( switch ), for example, via Arduino based controller ( see https://sourceforge.net/projects/ardu-switch/ ) Prerequisite: pyserial Build as usual for a Gnuradio block: - download and unpack - cd gr-message_to serial - mkdir build && cd build - cmake .. && make - sudo make install && ldconfig If successful this block is into OOT section...

...Enjoy :-) ****************************************************************************** "Remote HF Operation" it's now a reality! With this app it's possible to send CW, with CWdaemon, over net ( local / internet ). Easy setup of: - cw macro [ labels / messages ] - cw WPM speed, accessible also via GUI, with a 10 / 40 WPM speed range - network settings. Moreover it's capable of control an HF rig ( via Hamlib network control ); in my testbed I'm using an uSDX transceiver, 5W, all mode, full SDR. ...

...There are six macro buttons on the screen that are configured in the setup screen. There are three entry fields for sending other text messages. The abort button stops sending code, The scroll bars set send speed and Farnsworth spacing. The setup button opens the configuration screen. The setup screen is used to configure the 12 buttons. The lower three buttons are for the user name, QRZ password, and to set the serial port. Press the save edit button to save changes. 73, Todd