Search Results for "vb.net serial port"

cooling home automation with Arduino(C) and Raspberry(front-end, python). Arduino features: - control PC 4-pin fan with PWM; - measure temperature/humidity with DHT11/22; - adjust fan RPM depend on temperature; - console management; - MQTT serial output. front-end features: - data collection form serial port with MQTT - webUI with for sensors parameters

This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...

Platform-Independent Primitives. Contain string, thread, timer, file, config file, serial port, ethernet (UDP, TCP, broadcast, multicast), protocol, multiprotocol, peer, console, variable, struct, evaluator, system monitor (Linux only), CLI (command-line interface) parser. Package include library that you can build with 'qmake' or 'CMake' and test program in 'main.cpp'. Online documentation: http://ppip.sourceforge.net/doc/

... serial port emulator with software like Stellarium, to control the network exported telescopes. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. It can publish the service using mDNS as XXX._nexbridge._tcp.local. where XXX is user specified name with "-s" option. Now ttynet tool is added which connects a virtual serial port to a network exported serial port.