Search Results for "linux command"
Sort By:
Showing 36 open source projects for "linux command"
View related business solutions-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
1
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
2
dfu-util
Multiplatform USB DFU host utility
dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB. -
3
Alt-F
free alternative firmware for the DLink DNS-320/320L/321/323/325/327L
Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure... -
4
OpenBLT
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates. -
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
5
FlashForth is a standalone Forth system for the Microchip PIC 18, 24, 30, 33 and the Atmel Atmega series of microcontrollers. A Forth system with interpreter, compiler, assembler and multitasker is provided.
-
6
amforth: Interpreter on Microcontrollers
amforth is an extendible interpreter on microcontrollers
amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard. -
7
pFFh
a self-contained development environment for embedded systems.
pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At... -
8
GCDebRTrc
Debug Facility for Real-Time issues
For C (and CPP obviously): Include a fast and tiny RAM-tracing feature for Real-Time (RT) debugging purposes. >> ONLY FOR DEBUGGING << Very much faster than printf-debugging, which may result in unforseen results in an RT environement. -
9
KleOS
KleOS brings together Arduino, FreeRTOS and Arduino-mk to you.
KleOS 1.1.0: Fixed some warnings. KleOS 1.1: Offers support for the Arduino Due boards. KleOS 1.1_Due: It's the actual support for Arduino Due boards. --- KleOS project is here to help you create real time applications for the Arduino platform. * Arduino. Your preferred electronics platform. * FreeRTOS. The real time operating system for embedded systems. * Arduino-mk. The tool to compile your Arduino projects from the command line. Arduino is the opposite to real time; however,... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
Tool to create SVF files from HEX files for Atmel microcontrollers, similar to the closed-source avrsvf.exe application available from Atmel. You should be able to compile the tool on any platform with a C compiler, like Linux, Mac OS X, FreeBSD.
-
11
clzw
Implementation of LZW compression algorithm in C
Simple, fast implementation of LZW (Lempel–Ziv–Welch) data compression algorithm in C. - Console encoder/decoder tools - OS independent - Could be used in embedded projects - Works with raw code-stream LZW features: - Hardcoded dictionary size - Variable code size - Code search is performed by hash table and embedded in dictionary linked lists (encoder) - No dynamic memory allocation -
12
CTREE Graphic Tree Generator for C
An analysis tool showing the structure of a C program
CTREE is a command line utility providing analysis tools useful to software engineers tasked with tracking down problems or verifying a program's soundness. It is also an aid to understanding the structure of unfamiliar programs. As it works with standard C it finds most of its utility in embedded systems and older software. CTREE comes with a comprehensive manual. CTREE is is released by Cleveland Engineering Design, LLC - developer of the CoRTOS cooperative... -
13
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back... -
14
NtdIsp
A system for programming LPC, STM32 and possible others devices.
This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported. -
15
autoCode4
Synthesizing embedded control software from formal specifications
autoCode4 is an engine that synthesizes controllers from formal specifications described under a subset of linear temporal logic (LTL). Importantly, it synthesizes synchronous dataflow controllers (in Lustre or in Ptolemy II form) and maintains requirement-to-code traceability. Such feature is mandated in developing safety-critical systems and are considered essential for specification validation or integrating manual implementation such as legacy code. The LTL specification captures... -
16
SmartSlog (Smart Space Ontology) is a software/application development kit (SDK or ADK) for programming Smart-M3 agents (Knowledge Processors, KPs) that consume/produce smart space content according with its high-level ontological representation. SmartSlog applies the code generation approach: given an OWL ontology description, the ontology programming library is produced. The latter provides API to access the smart space via a Smart-M3 Semantic Information Broker (SIB) and data structures...
-
17
Easy CNC
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters. -
18
GDBServer Extender (gdbx)
Extend GDB Server feature, OS Aware Debugging, Thread Stack Checking
GDBServer Extender（gdbx）顾名思义就是为GDB调试扩展一些本来没有的功能。例如线程（任务）感知调试（OS Aware）、线程（任务）堆栈检查等。支持FreeRTOS、eCos。支持OpenOCD、J-Link、QEMU。支持Cortex-M、i386。 请移步https://code.csdn.net/zoomdy/gdbx获得更多内容。 -
19
COFILOS
A Development Framework for Coldfire
Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO... -
20
jpegant
Embedded JPEG encoder
Jpegant is a compact JPEG encoder for embedded applications. It is intended to be executed on small microcontrollers or microprocessors. High speed and small memory usage is its main concern. It implements a subset of JPEG standard. Now the code contains JPEG decoder so if you decided to use nonstandard transform or entropy coding in encoder you still will be able to decode bitstream (provided that you keep the decoder in sync of course). Release 1.1 source code and Windows... -
21
Akalon Embedded OS (RTOS)
Embedded Real-Time Operating System (RTOS)
Akalon is a Bare-Bones Embedded RTOS that's designed to be simple and portable to any Microprocessor or System (Board). Currently supports the Intel and ARM Architectures. -
22
Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.
-
23
FRSH/FORB is a contract-based resource reservation framework for distributed real-time applications.
-
24
A C++ based lightweight, non-invasive SCA (Service Component Architecture) runtime. Optimized for the use in the embedded domain. We are proud to announce release 0.8 of Trentino Release 0.8 adds a major feature to Trentino. With Service discovery, configuration, deployment and operation of Services on devices is made simple and cost efficient.
-
25
dasm430
A disassembler and a simulator for the MSP430 CPU
A disassembler and a simulator for the MSP430 CPU. Both programs only read TI-TXT files. Licensed under the Simple Public License (SimPL) 2.0. For full license information, please read license.txt. Compiled executables are available for Windows and Mac OS X. Linux users will have to compile their own binaries. Instructions for compilation are included in README.txt. A Qt-based GUI is available for sim430. Binaries only for OS X, for now. Source files can be found in src/qt folder.
