Search Results for "jargs/gnu/cmdlineparser"
Sort By:
Showing 12 open source projects for "jargs/gnu/cmdlineparser"
View related business solutions-
Boost application security and continuity with SKUDONET ADC, our Open Source Load Balancer, that maximizes IT infrastructure flexibility. Additionally, save up to $470 K per incident with AI and SKUDONET solutions, further enhancing your organization’s risk management and cost-efficiency strategies.
-
This means every device on your network, and every interface on every device is automatically analyzed for performance, errors, QoS, and configuration.
-
1
lpACLib
An Open-Source Library for Low-Power Approximate Computing Modules
The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source... -
2
cMIPS
cMIPS - an FPGA ready VHDL model for 5-stage pipeline, MIPS32r2 core
This project was moved to https://gitlab.c3sl.ufpr.br/roberto/cmips The code here is no longer up to date. The VHDL model mimics the pipeline design described in Patterson & Hennessy's book (Computer Organisation and Design) and is an almost complete implementation of the MIPS32r2 instruction set. The TLB and assorted control registers will be included soon (as of fev 2015). The model was synthesized for an Altera EP4CE30F23. The model uses up 15% of combinational blocks and 5% logic registers. -
3
OpenSOC86
Open implementation of the x86 architecture
OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios... -
4
Sharp MZ800 univerzalni karta periferii 1 ----------------------------------------- Contains peripherals: emulator of FDC WD279x, RTC, single channel SIO, repository manager, LAN10Mbit Chips on the card: STM32F101, XC9356, ENC28J60, FT232RL, MAX3232
-
Collaborate is customizable case management software for non-profits and social services agencies with teams of 5+ staff.
-
5
Partially Reconfigurable Hardware
Framework for Adaptive Hardware Concurrent Systems with DPR-FPGAs
This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating... -
6
Devellopement d'un controlleur d'affichage (VIC) du commodore 64 embarqué dans un FPGA avec controlleur d'animation integré.
-
7
-
8
Expansion card for 8 bit computer Sharp MZ-800. Connection to SD / MMC card with FAT16 filesystem. Emulated FD controller. MZF repository. This project is already stoped. Please see the MZ800 Unicard 2nd generation https://sourceforge.net/projects/mz800ukp1/
-
9
The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.
-
We design our technology to make workforce management easier. APS offers core HR, payroll, benefits administration, attendance, recruiting, employee onboarding, and more.
-
10
FPGAmer is a framework to develop embedded games. Our development platform is the Xilinx University Program Virtex-II-Pro but not limited to that. FPGAmer includes custom hardware components plus a custom software framework and some sample games.
-
11
Software which runs on a gunstix overo, to contron stepper motors, and servos in such a way that they play the piano. The actual stepper motor and servo driver are done on an FPGA board from knjn.com (pluto-3).
-
12
- Previous
- You're on page 1
- Next