Search Results for "msp430"

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

Mecrisp-Across tethered Forth for MSP430 Micro controller Target using a Ti Tiva Connected Launchpad as the Host via a 4 wire JTAG connection. No need to pre-flash anything, no bootloader … nothing, just connect the four wire Tether and start developing your embedded application on the MSP430xx target immediately!

PRTOS is an open-source preemptive real time operating system kernel for embedded applications. It presently supports the AVR and MSP430 architectures. The advantages of PRTOS are: It has the smallest footprint of any true preemptive system: 1.9kB for basic scheduling and task control, 5.1kB with all the features below (AVR '328 / gcc -Os); Only 950 lines of code implement all of the RTOS features (SLOC-L); The system is well documented with a comprehensive manual, well-commented source code, and a test suite demonstrating the features; The system is proven - it has been in use since 1982 with applications in in-vitro medical equipment, process control instrumentation and industrial machinery; PRTOS is released by Cleveland Engineering Design, LLC - developer of the CoRTOS cooperative RTOS https://sourceforge.net/projects/cortos-simple/ and the CTREE analysis tool https://sourceforge.net/projects/ctree-graphic-tree-generator/ Commercial licensing is available

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

A disassembler and a simulator for the MSP430 CPU. Both programs only read TI-TXT files. Licensed under the Simple Public License (SimPL) 2.0. For full license information, please read license.txt. Compiled executables are available for Windows and Mac OS X. Linux users will have to compile their own binaries. Instructions for compilation are included in README.txt. A Qt-based GUI is available for sim430.

Compiler and device support for Ada programs on the ultra-low-power TI MSP430 microcontrollers. This project builds on the Gnu Gnat/GCC Ada compiler, the Sourceforge mspgcc back-end and MSP430 CPU support. It was inspired by the Sourceforge AVR-Ada project.

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.