Search Results for "draw-io"

This project is aimed at producing open source hardware for real time use in industrial automation. This project will have a few sub-projects that will focus on individual hardware for various industrial purpose. Some of the sub-projects will be of type Field-IO Modules development, Analog-IO Module development etc.

Encode bitmap(bmp) file with run-length encoding(RLE), just like RLE4 and RLE8, but extend to RLE16, RLE24 and RLE32. Usually, this project will be used in GUI of embedded system, to make the image files smaller, and save the IO bandwith. If the GUI support JPG or PNG, the compression ratio is much better than RLE, but how about the embedded system encounters both caculate limitation and IO bandwidth limitation? Try this project, I hope it can make a banlance between caculation and bandwidth. But first of all, you should know that the compression ratio of RLE is highly depend on the bitmap file data, the ratio can larger than 1, only when the same color continuously repeats in one line, it will gain a smaller compression ratio.

The GLCD SED1531 Library provides functions to draw pixels, lines, filled- and open rectangles and text for micro-controllers such as the Atmel 8-bit AVR series for (very cheap!) SED1531 controller based graphical LCD's. The library is written with portability to other micro-controllers and compilers in mind; all target specific parts are stored in a separated header file . The included example is for the Atmel ATtiny2313 and AVR-GCC.

Feathery is a very small and full-featured ftp server for embedded devices. It is easy portable to every 8, 16 or 32 bit architecture and can run with or without an operating system.

Working with microprocessors is one of the most creative, challenging and rewarding areas of electronic and software engineering. Open-USB-IO makes learning this process fun and easy.

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm