Search Results for "gnu/linux" - Page 8

FAMOUSO is an event-based publish/subscribe middleware written in C++ for systems ranging from 8Bit micro-controllers up to 32Bit PC/Workstations.

SpinDrive is a Parallax Propeller Chip-based engine control system.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.

The goal of jpegEnc is to provide a fundamental JPEG Encoder. Major features: * Tiny foot print * Twice faster than the libjpeg * Process is on band by band basis. Output to a user specified buffer. * Best for Embedded or small foot print project

FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware. Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.

This is a copy of the official sources that were provided to me upon GPL fulfillment request by LG Electronics for the software on my 47LG70 LCD HDTV. Many have problems obtaining these as LG. Includes linux 2.6.10, microwindows, and busybox 1.2.1.

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.

Implementation of virtual threads for the XS-1. Currently a simple context switching implementation for the XMOS XS-1 architecture (Gn, Ln products). Allows a user to run low speed processes on a single thread using time sliced scheduling.

Weeno is an software-only extension of Wiring / Arduino for potentially all and any Atmel AVR MCUs. And potentially all chip architectures from all companies, whether Freescale, SiLabs, TI, even ARM. Basically, the goal is to make AVR-Weeno, ARM-Weeno, 8

Working with microprocessors is one of the most creative, challenging and rewarding areas of electronic and software engineering. Open-USB-IO makes learning this process fun and easy.

The C-Bus Module is used to provide a C-code API between a Clipsal C-Bus PCI interface, and an application program. Application programs can be on small embedded micros with no OS and only a few K of RAM, thru to Windows & Linux.

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

Simplify build and use of software emulated board, using a configuration textual file.

K-OS is an open-source realtime-operating-system based on the OSEK/VDX standard aimed at compiler and microcontroller independence. Currently we support Motorola (Freescale) HC12/HCS12/HCS12X targets.

A computer operating system.

Lightweight matrix lib, especially good for micro-blaze or other embedded processor which needs to do matrix operations. Supports Add, Subtract, Multiply, Transpose, and Invert (Cholesky Method). Compiles to 15kbs using -0s and is ISO C compliant.

The Carmedia Front-End project aims to develop a fully featured and open-source front-end for in-car integrated computers.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm

The Embedded Data Display System provides a lightweight portable C++ server library and a PC (Windows, Linux, or Mac) based client that captures and graphically displays data generated by embedded devices such as medical or industrial instruments.

This project designs the oswrap including task scheduler, timer, semaphore, mailbox, wait, memory key components. Support Linux and windows platform and distributed system.

...IA32 architecture, 32-bit protected mode, Memory paging, Keyboard, Timer Interrupt Handling, and a simple kernel shell to operate. Written in C language, development under Linux environment.

TinyOS for 8051 based platforms such as Texas Instruments CC2430, Nordic Semi nRF24e1 and SiLab c8051F34x.

This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller...