Search Results for "linux" - Page 4
Sort By:
Showing 200 open source projects for "linux"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
COFILOS
A Development Framework for Coldfire
Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO... -
2
MonitoringRelay
Three phase protection device
This firmware implements a three phase Monitoring Relay, that is designed to continually monitor phase rotation of 3-phase lines as well as phase failure. -
3
Testability Measurement Tool
Performs SCOAP and PODEM algorighms on ISCAS89 Netlists.
This application calculates combinational and sequential SCOAP parameters (CC0, CC1, CO, SC0, SC1, SO) and Testability Index parameter from a ISCAS89 netlist. It also performs the PODEM algorithm to check testability of a net against a single stuck at 0 or 1 fault. -
4
FridgeDuino
Arduino based fridge control
FridgeDuino is a firmware for an Arduino based fridge control. The code follows a modular design, separating the core functionality from the user interface. This allows easy integration with user interfaces from different manufacturers. For the GPL version, only the Whirlpool WRM series is supported. Feel free to contact us for any particular customization. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
jpegant
Embedded JPEG encoder
Jpegant is a compact JPEG encoder for embedded applications. It is intended to be executed on small microcontrollers or microprocessors. High speed and small memory usage is its main concern. It implements a subset of JPEG standard. Now the code contains JPEG decoder so if you decided to use nonstandard transform or entropy coding in encoder you still will be able to decode bitstream (provided that you keep the decoder in sync of course). Release 1.1 source code and Windows... -
6
Core13
Arduino core for Attiny13
An Arduino core for the Attiny13 processors designed with small size in mind. *Support*: http://arduino.cc/forum/index.php/topic,89781.0.html Currently supported functions: * = Partial support map() random() randomSeed() millis() micros() delay() delayMicroseconds() * analogRead() analogWrite() pinMode() digitalRead() digitalWrite() pulseIn() (Untested) shiftIn() (Untested) shiftOut() (Untested) If you find any issues be sure to make sure you are using the latest... -
7
scmRTOS is tiny Real-Time Preemptive Operating System intended for use with Single-Chip Microcontrollers. scmRTOS is capable to run on small uCs with as little amount of RAM as 512 bytes. The RTOS is written on C++ and supports various platforms.
-
8
BlackLib
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
9
A Linux tool for the MikroElektronika (www.mikroe.com) AVRprog2 programming hardware. We have migrated to Github! https://github.com/avrprog2/avrprog2-code
-
Train ML Models With SQL You Already KnowBuild and deploy ML models using familiar SQL. Automate data prep with built-in Gemini. Query 1 TB and store 10 GB free monthly.
-
10
Serial Wire Debug (SWD) Open Library for low level Debug Access Port (DAP) on new ARM Cortex CPU devices. PROJECT HAS MOVED TO https://GitHub.com/CeDeROM/LibSWD PLEASE UPDATE YOUR LINKS! :-)
-
11
eChanter is an Open Source electronic bagpipe project, based on the Arduino platform, using capacitive touch sensors, with polyphonic wavetable synthesis PCM audio at 8KHz. See Files for the development version, eChanter v3.0.
-
12
The GoodFET is an open source JTAG programmer based upon the Texas Instruments Flash Emulation Tool. While retaining partial compatibility with the TI design, the eventual goal of this project is standalone firmware with no proprietary components.
-
13
XRF Config
Cross platform configuration tool for Ciseco XRF radio devices
A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it. -
14
lcd4x1_module
Applications for a 4 digit LCD breadboard module
A module with a 4-digit LCD and 5 switches, controlled by an Atmel ATmega169, to be used on a breadboard. This project has the hardware files for the PCB and applications running on it. -
15
Em::Blocks STM32F4-Discovery USB CDC
Template Virtual COM Port Project
Template Em::Blocks project for the STM32F4-Discovery board as USB virtual com port. Using the standard peripheral library (not the new HAL). No board specific headers are used. Get the driver here: http://www.st.com/web/en/catalog/tools/PF257938 -
16
Hydroponic Automation Platform (HAPI)
Technologies for automating food production on various scales
The Hydroponic Automation Platform Initiative (HAPI) develops and provides hardware and software components for automating food production using hydroponic, aquaponics, and precision agriculture techniques. High-yield production in urban settings is one of the primary goals. Artifacts include hardware design (mainly Arduino-based), firmware, management software and reporting modules. -
17
UFFS: Ultra-low-cost Flash File System, designed for NAND flash working in embedded system. UFFS typically consumes less then 200K ram for 1Gb(page 512)/4Gb(page 2K) NAND flash. It supports direct flash interface, works with or without OS.
-
18
Akalon Embedded OS (RTOS)
Embedded Real-Time Operating System (RTOS)
Akalon is a Bare-Bones Embedded RTOS that's designed to be simple and portable to any Microprocessor or System (Board). Currently supports the Intel and ARM Architectures. -
19
OpenSOC86
Open implementation of the x86 architecture
OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the... -
20
OpenSPA
OpenSPA MOD for OpenPCTV
-
21
SARK110 SDK
SDK for the SARK-110 Antenna Analyzer
The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application.... -
22
tech00
Technology project
Technology project. Goals: 1. CMSIS alternative implementation. 2. Custom MCU peripheral description. 3. Extended linker script. 4. Build time configuration. 5. Specific Makefile. Toolchain: Sourcery CodeBench Lite 2013.11-24 Target board: STM32VLDISCOVERY Functionality: As of now only test of core API and LED blinking. Might be used as application template. -
23
-
24
itemis CREATE - formerly known as Yakindu Statechart Tools (SCT) - is a tool for the specification and development of reactive, event-driven systems with the help of state machines. It consists of an easy-to-use tool for graphical editing and provides validation, simulation and code generators for different target platforms. Visit http://www.statecharts.org for more information! !! YAKINDU SCT HAS MOVED !! DOWNLOAD FROM https://info.itemis.com/download-yakindu-statechart-tools
-
25
ArdvtLedBoard
Arduino Based Driver for Advatel Ledboard
This is an Arduino Library for the Advatel TCD226R Ledboard (160 cols x 7 Rows Red Leds). This library allows several text transitions and includes a demo that supports both serial and SD Card input.
