Search Results for "usb flash"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer...

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is...

FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Appliance Distribution, Supports USB/Compact Flash devices, Provides a read-only-root filesystem, No need to fsck OS partitions, Appliance State held in dedicated CFG partition, Active/Standby partition design, Simple update/test/rollback

Vanilla Kernel support only embedded flash and DM9000 Ethernet controller. This project extend support perepherial on Toradex, Orchild and other evaluation board, and may be, some embedded applications.