This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more.
The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes.
Also, a serial port loop back...
Turns the BeagleBone Black into a Nintendo-based retrogaming console.
... gamepads, and edit ROM descriptions for the front-end GUI. There's no need to hand edit configuration files or manually copy ROM files onto the microSD card!
BES source: https://github.com/hendersa/bes
BES web interface: https://github.com/hendersa/bes-config-node
BES kernel device tree: https://github.com/hendersa/bes-dtb-rebuilder
Web based GUI for accessing ATMEL ATNGW100 board's flash memory.
NetFlash100 contains a full system image with a Linux kernel, root file system and the web interface to access flash memory of ATMEL ATNGW100 boards.
To be able to use NetFlash100 you need:
1. ATNGW100 board with a working u-boot.
2. Ethernet and serial terminal connections.
3. A SD card (must be more than 40MB)
Once you successfully boot NetFlash100 image, it provides you with a web interface on IP 10.0.0.1, with this interface one can read, write and erase the available flash...
FunkOS is an RTOS for 8-32 bit MCUs including AVR, MSP430, and Cortex M3. Both C and C++ kernels avaiable. Key features include preemption, periodic events, device drivers, and mutex/semaphores. Includes a variety of graphics and filesystem middleware.
Please also check out FunkOS's big brother, Mark3OS. Mark3OS is slightly larger, but is more scalable, much more feature-rich, and supports a wider variety of devices.