Search Results for "ftp web interface"

Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure it. Besides the built-in software, Alt-F also supports additional packages on disk, including ffp and Entware packages, that you can install, update and uninstall using the administering web pages Alt-F is being developed and tested on a DNS-323-rev-A1/B1, a DNS325-rev-A1, a DNS-320L-rev-A1 and on a DNS-327L-rev-A1 hardware boards. ...

...A full system image, ready to be written to a microSD card and used as-is, is available for download. Just connect your BES-enabled BeagleBone Black to your network and you can use BES's Node.js web interface to add or remove ROMs, configure gamepads, and edit ROM descriptions for the front-end GUI. There's no need to hand edit configuration files or manually copy ROM files onto the microSD card! BES source: https://github.com/hendersa/bes BES web interface: https://github.com/hendersa/bes-config-node BES kernel device tree: https://github.com/hendersa/bes-dtb-rebuilder

PearlPi is a light weight very basic LXDE desktop with Kodi Media Center installed. Great distro for anyone to add your favorite raspberry pi software to. BE SURE TO DOWNLOAD THE README FILE (choose browse all files under download link) What sets PearlPi apart from other releases is a self contained OS with both a Linux desktop for you basic computer tasks as well as Kodi Media Center for all your entertainment desires. Kodi streams perfect 1080i HD Video Streams from your home...

Controlling Model Railroad via Networks "Lanbahn" Concepts - intelligent end devices - all with a network, wlan or other sophisticated interface. - can be operated without a central station - no complex binary protocols - communications via multicast UDP messages - decoders can advertise their capabilities via zeroconf/avahi/bonjour protocol. - raspberry pi as one hardware platform - tinkerforge IO bricklets for turnout and signal control

OPC layer for Mozilla platform. Web-based XUL interface + OPC data. Crossplatform framework for developing OPC servers. Opc UA Binary protocol realization.

NetFlash100 contains a full system image with a Linux kernel, root file system and the web interface to access flash memory of ATMEL ATNGW100 boards. To be able to use NetFlash100 you need: 1. ATNGW100 board with a working u-boot. 2. Ethernet and serial terminal connections. 3. A SD card (must be more than 40MB) Once you successfully boot NetFlash100 image, it provides you with a web interface on IP 10.0.0.1, with this interface one can read, write and erase the available flash devices on the system. ...

HybridOS is an operating system dedicated to embedded devices, it's based on Linux kernel and FMSoft's mature software technologies, like embedded graphics system (MiniGUI), embedded web browser (mDolphin), and embedded J2SE solution (mPeer).

Control your IoT board with a graphical interface from your local network. CNatural is a remote desktop for embbeded systems and IoT boards without running a real desktop on the host platform, this makes CNatural more efficient than other remote desktop managers. Because all rendering and applications runs on the client's web browser, the host board will run fast as usual.