Search Results for "usb drum software"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

The IoT Leaf is a small ESP32-based device which can be used as highly flexible power supply, as embedded controller or as a combination of both: it consists of a board which can be cut into two pieces resulting in two different devices or which can be used as one. The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module...

Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO board...

FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices.

Template Em::Blocks project for the STM32F4-Discovery board as USB virtual com port. Using the standard peripheral library (not the new HAL). No board specific headers are used. Get the driver here: http://www.st.com/web/en/catalog/tools/PF257938

Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.

BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.

... be used for each hand, effectively doubling the typing speed). SpiffChorder hardware is based on Atmel AVR ATmega168, using Objective Development's V-USB (a software-only implementation of a low-speed USB device).

Metano Linux is a GNU/Linux distribution made to run in mobile devices and PDA's.

This project is a usb library for the Zilog flash based micro-controllers.

Working with microprocessors is one of the most creative, challenging and rewarding areas of electronic and software engineering. Open-USB-IO makes learning this process fun and easy.

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

We are about to develop a tool(development kit) which can support developing embedded software by using USb transfer between target machine and development machine.