Search Results for "temperature"

NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original...

The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)...

...For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is controlled with pulse-width modulation (PWM) of a solid-state relay (SSR). Documentation : https://tinyurl.com/y7579v6a

...After start the sensor device, there will be a Wifi-AP for configuration purposes. After successfully configuration, the sensor is connected as a Wifi-client and send the temperature and humidity data via MQTT within the given intervall. During AP-mode and client-mode, there are some RESTful functions (HTTP-requests) available, for configuration and retrieving information.

My project of ethanol conversion kit for gasoline cars. Project is based on firmware for bioadapter, but here i design my own HW. Biggest advance is use of temperature sensor to modify cranking maps in cold weather.

.... -3,2" TFT diplaying temperature, led power, led status (cloud, sunrise, sunset...), clock, time of next cloud. -Local web server is running but webpage need to be finished -Web COSM client. Online temperature logging -Virtual RTC In development: -Addition of the last DS18B20 -Rebuild TFT touchscreen menu -Reorganization and clarification of the code -Implement DS1307 (actual chip is down, waiting for a new one...)