Search Results for "usb linux"

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

DruidBSD is a FreeBSD micro-distribution that supports CD/DVD, USB, and HD booting into a Live BSD Distribution.

BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.

Spaceman Spiff's Chording Keyboard Experiment (or SpiffChorder for short) is an experimental platform for creating a USB chording keyboard. A chording keyboard or Chorded keyboard is an input device where characters can be typed by pressing multiple keys at the same time. A popular design is the 7-key chorder, where one key is used for each of the index finger, middle finger, ring finger and pinky, and 3 keys for the thumb. This can be used with either the left or right hand (or a chorder...

Appliance Distribution, Supports USB/Compact Flash devices, Provides a read-only-root filesystem, No need to fsck OS partitions, Appliance State held in dedicated CFG partition, Active/Standby partition design, Simple update/test/rollback

TeutonPE is inspired by PortableApps.com combined with a PeBuilder compiled Boot USB / CD. Programs can be used, even when there is no OS installed. BB4win is used for Live Menu and as the default Shell.All Plugins are also BartPE & XPE compatible

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller...