Search Results for "wire"

NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original...

Mecrisp-Across tethered Forth for MSP430 Micro controller Target using a Ti Tiva Connected Launchpad as the Host via a 4 wire JTAG connection. No need to pre-flash anything, no bootloader … nothing, just connect the four wire Tether and start developing your embedded application on the MSP430xx target immediately!

... * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface for temperature sensors. * Soil Moisure Sensors are responsible for sensing if the soil of irrigated flowers are wet or not. These sensors are attached to the Sensor Controller Module via slow speed I2C bus. The modules use 2-pin probes and drives them with 4 kHz square wave in order to avoid oxidating the probes. ...

Serial Wire Debug (SWD) Open Library for low level Debug Access Port (DAP) on new ARM Cortex CPU devices. PROJECT HAS MOVED TO https://GitHub.com/CeDeROM/LibSWD PLEASE UPDATE YOUR LINKS! :-)

Perform environmental monitoring of a large number of server room racks. The solution monitors 48 racks. Each rack having 3 temperature sensors. Environmental data accessible a RESTfull interface. Individual sensors addressable via SNMP. The solution is comprised of a custom PCB containing a ATMEGA328P with UNO bootloader. The PCB called envmon board collects the environmental data and outputs it to a Raspberry PI. The Raspberry PI is the head unit providing network access to the data and...

...The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running: -16x2LCD display and menu to manage clock, cloud and lightning setup. -3,2" TFT diplaying temperature, led power, led status (cloud, sunrise, sunset...), clock, time of next cloud. -Local web server is running but webpage need to be finished -Web COSM client. Online temperature logging -Virtual RTC In development: -Addition of the last DS18B20 -Rebuild TFT touchscreen menu -Reorganization and clarification of the code -Implement DS1307 (actual chip is down, waiting for a new one...)

A C++ based lightweight, non-invasive SCA (Service Component Architecture) runtime. Optimized for the use in the embedded domain. We are proud to announce release 0.8 of Trentino Release 0.8 adds a major feature to Trentino. With Service discovery, configuration, deployment and operation of Services on devices is made simple and cost efficient.

SpinDrive is a Parallax Propeller Chip-based engine control system.