Search Results for "test automation"

In this project i want to create a simple layer, this layer help the people to create a home or industrial automation with Power Line Communication. I use the chip ST7580, in particular i use the evaluetion kit: EVALKITST7580-1 for my test

fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in...

Professional stored program control. It is optimized for heat control, but you can control whatever you want. It use a FreeRTOS.org-Kernel on an Atmel AT32UC3A1512 and control Triacs over AVR ATtiny2313. The heatcontrol for your heating.

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and...

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm