Search Results for "sing-box"

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

Visit also: https://github.com/Anthilla/AnthillaOS For more updated Informations. Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based...

Firmware for home made ECU/PCM (Electronic Fuel Injection & ignition controller) for 2006 Ford Mustang car. It also supports vehicle's CAN bus to exchange data with smart junction box unit (gauge cluster && a/c). Project is based on megasquirt project, it uses same tuning tools (megatune/TunerStudio MS). There are three CPUs in total, so project contains three diferent firmwares for each microcontroller. Main CPU is NXP ARM7 LPC2366 running AOS operating system (also my project). Remaining CPUs are ATMEGAs - electronic thortle controller and IO controller.

fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in C++ and has been compiled on Linux.

AVRpal is an open source simple but powerful gui for avrdude on windows platform with an easy to use interface.It is an alpha release by CEMSTech supporting only USBasp programmer and soon it will be released as a full featured avrdude gui.