Search Results for "router linux"

Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

A tiny embedded Linux distribution forked from LEDE (https://www.lede-project.org) which in turn is forked from OpenWrt (http://openwrt.org). This project is aimed at routers with at least 8-16 MB flash and 128+ MB RAM. Exploration is being made for OpenEmbedded/Yocto for larger devices in a new project. In the interim the follow targets are also supported: 2) Minimalist virtualization/container hosts (only on x86/ARM at the moment for hypervisor, any for container). 3)...

The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters.

SUSFinder is a utility to assign IP address and flash firmware to ASUS WL-500G Premium router booted in recovery mode on local network, in the case that you didn't know router's IP address settings beforehand. This utility do essentially the same thing as ASUS Firmware Restoration Utility, except that it relies on the external 'atftp' program to do the TFTP firmware flashing part. Currently, SUSFinder is written in ANSI C with POSIX API, thus should be portable to most Unix-like...

This project is aimed to add the ADMtek compatible USB-Ethernet converter support to the ARM systems, including Android. The patch provided is intended for http://pegasus2.sourceforge.net/ Pegasus/Pegasus II USB Ethernet Linux driver. It allows the driver successfully run on ARM making it send the correctly aligned requests for DMA. Tested on Android 4.2.2 (Linux 3.0.36) with DesignWare USB 2.0 OTG Controller (DWC_OTG). Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

MikroConf is a command line administration interface for Linux-based embedded systems (linux/uclibc/busybox), which can be easily extended with new administration modules using the Tcl programming language.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.