Search Results for "networking"
Sort By:
Showing 30 open source projects for "networking"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
1
Alt-F
free alternative firmware for the DLink DNS-320/320L/321/323/325/327L
Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure... -
2
BSD Router Project
Router distribution based on FreeBSD with FFRouting and Bird
BSD Router Project (BSDRP) is a open source router distribution based on FreeBSD, supporting all majors routing protocols (RIP, OSPF, BGP, ISIS, PIM, etc..) and multi-tenant capabilities that fit on a 4GB Flash disk. -
3
Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.
-
4
IpWay/HOST free Tcp/Ip Stack Library
Real Time Tcp/Ip Stack Library
IpWay/HOST is a real time tcp/ip stack library designed for embedded applications on 32bit microcontrollers ARM and PPC based (STM32Fx, SPC56x, SPC57x, SPC58x), where execution efficiency and compact code are important requirements. IpWay/HOST is characterized by high portability, compact size, copyless feature (also for TCP applications) and Checksum offload. Moreover, IpWay offers a 100% compatibility with AUTOSAR MCAL versions 4.13 and 4.2.x. IpWayStudio is a free ARM development... -
Compliant and Reliable File Transfers Backed by Top Security CertificationsStop relying on non-certified, legacy file transfer tools that creak under the weight of modern security demands. Get full audit trails, advanced access controls and more supported by an award-winning team of experts. Start your free 25-day trial today.
-
5
BACnet for Dynamic C
BACnet stack for Rabbit 4000/5000/6000
This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort. -
6
COM Serial Terminal
COM Serial Terminal
COM Serial Terminal Update: Support COM Trigger Transmitting Win32/64 Ver -
7
Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.
-
8
Open Event Machine
An event driven processing runtime for multicore
Deprecated - see new repository in GitHub instead: https://github.com/openeventmachine/em-odp Open Event Machine (OpenEM or EM) is an architectural abstraction and framework of an event driven multicore optimized processing concept originally developed for networking. It offers an easy programming concept for scalable and dynamically load balanced multicore data plane applications with a very low overhead run-to-completion principle. EM can run on bare metal for best performance or under an operating system with special arrangements. This release of the Open Event Machine contains the EM API as well as an example implementation for Intel multicore CPUs. !!! ... -
9
Embedded debug!box
Allows executing code on MIPS32 EmbeddedLinux devices (WLAN routers)
This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool. -
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
10
AnthillaOS
a linux based readonly image as appliance
...Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based management all open source components from other projects are released under respective licenses, all parts, files,subprojects developed as part or this project are released under the BSD 3 clause license. -
11
Pegasus USB-Ethernet Linux ARM driver
Support for Pegasus-compatible USB to Ethernet devices on ARM(Android)
...Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet -
12
openchronos-ng
fully modular opensource firmware for the ez430 chronos
openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications). -
13
ONE-NET Low Power Wireless Protocol
ONE-NET is an open-source low power wireless networking protocol.
ONE-NET is both an open standard and an implementation of a wireless network protocol. The protocol was originally intended for home automation but has many more applications where low power, secure communications are required. -
14
FreeNFS
Network File System (NFS Versions 2.0 & 3.0) for Windows
FreeNFS is a NFS 2.0 and 3.0 Compliant Server for Windows. FreeNFSE is a NFS 2.0 and 3.0 Compliant Server for Windows to a Embedded System Client. Adding more protocols to better serve embedded systems and video streaming. Insure to read the Blog, for current information on whats new! -
15
ChipKit Network
Network stack for the ChipKit UNO32 and MAX32
This is a new object-oriented networking stack for the ChipKit UNO32 and MAX32 boards. It currently supports just the ENC28J60 ethernet chip, but could easily be expanded to include other network chips. It offers a full network stack, with TCP and UDP, along with the ability to have multiple ethernet connections. Multiple sockets across multiple protocols are also possible. -
16
tew-652brp_v2_wcl
Client mode firmware for TrendNET TEW-652BRP V2
Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client. -
17
Sercos UCC Ethernet Network Driver
Example for a sercos III Network Driver
This project contains an example Code of an Ethernet Network Driver for the Sercos III network which will communicate with help of the unified communication channel. This driver connects the UC Channel (CoSeMa API) to e. g. a VxWorks TCP/IP stack. -
18
WSNFuse provides an abstraction layer for wireless sensor networks, allowing to expose one or many WSNs by means of different access technologies(e.g.: filesystem, JMS, RMI, Smart-Spaces, etc.).Its plugin-based architecture allow users to develop and adopt thei own plugins and configure WSN fuse to better suit their needs. This project has been partially supported by the CHIRON EU research project co-financed by the artemis joint undertaking (http://www.chiron-project.eu/) .
-
19
nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).
-
20
nwEPC is a free and open source framework software implementation of SAE/EPC Serving Gateway or SGW and Packet Data Network Gateway or PGW, which is sometimes referred as SAE-Gateway as well.
-
21
P O B I C O S - Platform for Opportunistic Behaviour in Incompletely Specified, Heterogeneous Object Communities (www.ict-pobicos.eu)
-
22
This project includes both the libraries and applications created by Anturi Technology to communicate with Tag4M devices provided by Cores Electronic LLC. We want integrators and developers have the tools to build their own developments with Tag4M.
-
23
Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.
-
24
A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.
-
25
