Search Results for "linux networking"

Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure...

IpWay/HOST is a real time tcp/ip stack library designed for embedded applications on 32bit microcontrollers ARM and PPC based (STM32Fx, SPC56x, SPC57x, SPC58x), where execution efficiency and compact code are important requirements. IpWay/HOST is characterized by high portability, compact size, copyless feature (also for TCP applications) and Checksum offload. Moreover, IpWay offers a 100% compatibility with AUTOSAR MCAL versions 4.13 and 4.2.x. IpWayStudio is a free ARM development...

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

COM Serial Terminal Update: Support COM Trigger Transmitting Win32/64 Ver

Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.

Deprecated - see new repository in GitHub instead: https://github.com/openeventmachine/em-odp Open Event Machine (OpenEM or EM) is an architectural abstraction and framework of an event driven multicore optimized processing concept originally developed for networking. It offers an easy programming concept for scalable and dynamically load balanced multicore data plane applications with a very low overhead run-to-completion principle. EM can run on bare metal for best performance or...

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

Visit also: https://github.com/Anthilla/AnthillaOS For more updated Informations. Usable as test/dev exercise for appliances An x86 64bit gentoo image customized for readonly usage as appliances, fully functional and complete of more than 1000 pkg based on a gentoo+systemd distro. Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based...

This project is aimed to add the ADMtek compatible USB-Ethernet converter support to the ARM systems, including Android. The patch provided is intended for http://pegasus2.sourceforge.net/ Pegasus/Pegasus II USB Ethernet Linux driver. It allows the driver successfully run on ARM making it send the correctly aligned requests for DMA. Tested on Android 4.2.2 (Linux 3.0.36) with DesignWare USB 2.0 OTG Controller (DWC_OTG). Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

ONE-NET is both an open standard and an implementation of a wireless network protocol. The protocol was originally intended for home automation but has many more applications where low power, secure communications are required.

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

WSNFuse provides an abstraction layer for wireless sensor networks, allowing to expose one or many WSNs by means of different access technologies(e.g.: filesystem, JMS, RMI, Smart-Spaces, etc.).Its plugin-based architecture allow users to develop and adopt thei own plugins and configure WSN fuse to better suit their needs. This project has been partially supported by the CHIRON EU research project co-financed by the artemis joint undertaking (http://www.chiron-project.eu/) .

nwGTPv2 is free and open source implementation of GPRS Tunneling Protocol version 2 (GTPv2) or Evolved GTP (eGTP). GTPv2 is primarily used for control signalling between Serving Gateway SGW and PDN Gateway (PGW) in Evolved Packet Core (EPC).

nwEPC is a free and open source framework software implementation of SAE/EPC Serving Gateway or SGW and Packet Data Network Gateway or PGW, which is sometimes referred as SAE-Gateway as well.

P O B I C O S - Platform for Opportunistic Behaviour in Incompletely Specified, Heterogeneous Object Communities (www.ict-pobicos.eu)

This project includes both the libraries and applications created by Anturi Technology to communicate with Tag4M devices provided by Cores Electronic LLC. We want integrators and developers have the tools to build their own developments with Tag4M.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

A QT based GUI app that binds to a range of UDP ports and listens. The first time data arrives on a given port, a new tab is created inside the guy and the incoming data is displayed in a read-only text edit. File logging available for each port.

Titan allows service-oriented processing of context recognition applications on Wireless Sensor Networks. It includes an execution environment developed for TinyOS and a Java ME (Personal Profile) Network Manager intended to be run on a mobile phone.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

A kernel written by Merck Hung. IA32 architecture, 32-bit protected mode, Memory paging, Keyboard, Timer Interrupt Handling, and a simple kernel shell to operate. Written in C language, development under Linux environment.

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.