Search Results for "labview arduino interface"

A sky quality meter based on TLS237 and Arduino Nano. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without appropriate credit given to author. For a WiFi ESP32 much improved version please see https://sourceforge.net/projects/mysqmproesp32/ AUTHOR NOTE: HIGHLY RECOMMEND YOU USE AN ARDUINO MEGA FOR THIS PROJECT IF ALL OPTIONS ARE CHOSEN YOU CAN RUN OUT OF CODE SPACE ON A NANO

C library for TFT LCD's with 16-bit parallel interface (8080). Coded for AT90SAM3X8E (Arduino Due board). Uses https://sourceforge.net/projects/libsam3/ libsam3 library for peripheral initialization. Now supports: - two graphic IC's: ILI9325 and RA8875. - two touch controlle IC's: GT811 and XPT2046 Another chip support can be easily implemented.

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is...

This sketch makes the Arduino work as a GPIO interface for a computer, where input and output changes are transmitted in run-length encoding. Every time an input pin changes, the Arduino sends the new values of the input pins and the time since the last change. In a similar way, the Arduino can be programmed a sequence of output pin changes, each specified by the new values of the output pins and the time since the previous change.

A Windows based GUI for popular avrdude command line utility for AVR microcontroller Programming.It has got many features with a lightweight easy to understand interface. AVRdude is provided with it. It previously used LibUSBdotnet but now it uses LibUSBK for compatibility(http://libusbk.sourceforge.net/UsbK3/index.html) .Supports only USBasp programmer but if you can code,you can change it to work with your programmer.Feedback is necessary friends

FridgeDuino is a firmware for an Arduino based fridge control. The code follows a modular design, separating the core functionality from the user interface. This allows easy integration with user interfaces from different manufacturers. For the GPL version, only the Whirlpool WRM series is supported. Feel free to contact us for any particular customization.