Search Results for "control system studio"
Sort By:
Showing 60 open source projects for "control system studio"
View related business solutions-
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
1
MicroPython
Python implementation for microcontrollers and constrained systems
MicroPython is a lean and efficient implementation of the Python 3 programming language that includes a small subset of the Python standard library and is optimised to run on microcontrollers and in constrained environments. The MicroPython pyboard is a compact electronic circuit board that runs MicroPython on the bare metal, giving you a low-level Python operating system that can be used to control all kinds of electronic projects. MicroPython is packed full of advanced features such as an interactive prompt, arbitrary precision integers, closures, list comprehension, generators, exception handling and more. Yet it is compact enough to fit and run within just 256k of code space and 16k of RAM. MicroPython aims to be as compatible with normal Python as possible to allow you to transfer code with ease from the desktop to a microcontroller or embedded system. -
2
Alt-F
free alternative firmware for the DLink DNS-320/320L/321/323/325/327L
Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure... -
3
USBDM
Debugging and programming interfaces for Freescale microcontroller
USBDM BDM Interface for Freescale Microcontrollers USBDM consists of two components: Hardware interfaces for various target devices This includes interfaces ranging from very simple hardware to more complete and capable hardware. Software to support these interfaces This includes: - Plugins to work with Freescale's Codewarrior software under Windows - Plugins to extend the usabilty of Eclipse with USBDM and Codesourcery & ARM toolchains. This includes GDB sprites... -
4
Arduino mySQM Sky Quality Meter
mySQM powered by Arduino Nano
A sky quality meter based on TLS237 and Arduino Nano. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without appropriate credit given to author. For a WiFi ESP32 much improved version please see https://sourceforge.net/projects/mysqmproesp32/ AUTHOR NOTE: HIGHLY RECOMMEND YOU USE AN ARDUINO MEGA FOR THIS PROJECT IF ALL OPTIONS ARE CHOSEN YOU CAN RUN OUT OF CODE SPACE ON A NANO -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
6
octave-raspberrypi
GNU Octave toolkit for controlling a Raspberry Pi
Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware. -
7
Battery Optimizer
Helps to improve the life expectancy of an electronic device's battery
The creation of this device is in response to the overcharging issue that electronic devices with lithium ion batteries face. Most electronic devices when charged to 100 percent will continue to receive power from their charger, overtime this will slowly degrade the life expectancy of the lithium ion battery in the electronic device. The Battery Optimizer aims to increase the life expectancy of a lithium ion battery in an electronic device by automatically stopping power being fed to... -
8
HomePowerControl
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)... -
9
BACnet for Dynamic C
BACnet stack for Rabbit 4000/5000/6000
This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort. -
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
10
GCDebRTrc
Debug Facility for Real-Time issues
For C (and CPP obviously): Include a fast and tiny RAM-tracing feature for Real-Time (RT) debugging purposes. >> ONLY FOR DEBUGGING << Very much faster than printf-debugging, which may result in unforseen results in an RT environement. -
11
motion5
Specialised variant of GRBL focused on motion of up to five axes
motion 5 is a specialised variant of GRBL which is focused on motion of up to five CNC axes and laser processing instead of milling. It supports ATMega MCUs running with up to 20 MHz and provides jitter-free pulses with a frequency of up to 38 kHz. Wherever usage and handling of motion5 is different to original GRBL, this is described in Wiki. For the G-code commands please note that motion5 supports more axes which are named "A" and "B". So a GRBL-command "G1X10.0Y20.0Z10.0" which moves... -
12
mcip
Management and Control Information Protocol
MCIP is a lightweight inter-process communication (IPC) system. This project implements a protocol, a daemon and a shared library. It is aimed to be as simple, tiny and fast as possible, so it is adequate for embedded systems. -
13
Like OS
Real time preemptive embedded multi-thread kernel
This project is now in the research and development stage. It is intended for very small microcontrollers with a single processor and represent simple multithreading kernel what written by C language. Is planning create implementations for AVR8 and STM8, may be. Now it is suspended until better time. -
14
rims-arduino-library
Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is... -
15
libsam3
Small library with register wraps for AT90SAM3X
Set of wrapper functions for most used peripherals in AT90SAM3X8E (Arduino Due board). Coded in C (C++ compatibility not tested). Uses *sam.h* from Atmel Studio. -
16
PRTOS Preemptive RTOS for embedded aps
PRTOS is a simple, compact preemptive RTOS for embedded systems
PRTOS is an open-source preemptive real time operating system kernel for embedded applications. It presently supports the AVR and MSP430 architectures. The advantages of PRTOS are: It has the smallest footprint of any true preemptive system: 1.9kB for basic scheduling and task control, 5.1kB with all the features below (AVR '328 / gcc -Os); Only 950 lines of code implement all of the RTOS features (SLOC-L); The system is well documented with a comprehensive manual, well-commented source code, and a test suite demonstrating the features; The system is proven - it has been in use since 1982 with applications in in-vitro medical equipment, process control instrumentation and industrial machinery; PRTOS is released by Cleveland Engineering Design, LLC - developer of the CoRTOS cooperative RTOS https://sourceforge.net/projects/cortos-simple/ and the CTREE analysis tool https://sourceforge.net/projects/ctree-graphic-tree-generator/ Commercial licensing is available -
17
FXwm
A minimistic Linux window manager with css style config
Our take on a basic window manager for Linux which adheres to the philosophy of "do one thing and do it well." As a result, this window manager only manages windows and does not provide any supervision at all. Instead it relies on another program, such as wbar or web.de, to actually provide that functionality. And in order to keep administration to a minimum, there is only one config file that can be manipulated to change the appearance of the window chrome using css styled syntax. -
18
AVRpal.NET
A Windows based GUI for popular avrdude command line utility
A Windows based GUI for popular avrdude command line utility for AVR microcontroller Programming.It has got many features with a lightweight easy to understand interface. AVRdude is provided with it. It previously used LibUSBdotnet but now it uses LibUSBK for compatibility(http://libusbk.sourceforge.net/UsbK3/index.html) .Supports only USBasp programmer but if you can code,you can change it to work with your programmer.Feedback is necessary friends -
19
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. ... -
20
MSP430 C Code Library
Library of peripheral drivers, component drivers, utilities, and more!
A collection of C libraries for the TI MSP430 family of microcontrollers. -
21
This project is a modification of the project started by Derek Wight (found here https://sourceforge.net/projects/barebonespic/). "A bare-bones PIC programmer. This low-voltage programmer runs from the serial port of a Windows PC using a handful of inexpensive components." Notable changes here: 19-Oct-2016 - The clock is inverted and pulled low during blank events before/after programming. - The RichTextBox control has been replaced by an edit control. (RTB is considered unsafe...
-
22
autoCode4
Synthesizing embedded control software from formal specifications
autoCode4 is an engine that synthesizes controllers from formal specifications described under a subset of linear temporal logic (LTL). Importantly, it synthesizes synchronous dataflow controllers (in Lustre or in Ptolemy II form) and maintains requirement-to-code traceability. Such feature is mandated in developing safety-critical systems and are considered essential for specification validation or integrating manual implementation such as legacy code. The LTL specification captures... -
23
MGSyn
MGSyn - Automatic Synthesis for Industrial Automation
MGSyn (Model, Game, Synthesis) is an open-source tool which integrates game-based synthesis into model-driven development for industrial control and automation. It is served for research and educational purposes. MGSyn has been originally developed by Department of Informatics (Unit 6), TU München and fortiss GmbH and is now maintained by fortiss GmbH. The software is released under the GNU General Public License Version 3.0 (GPLv3). Please download the tutorial for step-by-step... -
24
Easy CNC
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters. -
25
FridgeDuino
Arduino based fridge control
FridgeDuino is a firmware for an Arduino based fridge control. The code follows a modular design, separating the core functionality from the user interface. This allows easy integration with user interfaces from different manufacturers. For the GPL version, only the Whirlpool WRM series is supported. Feel free to contact us for any particular customization.
