Search Results for "c source code" - Page 16

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

This project designs the oswrap including task scheduler, timer, semaphore, mailbox, wait, memory key components. Support Linux and windows platform and distributed system.

Software which runs on a gunstix overo, to contron stepper motors, and servos in such a way that they play the piano. The actual stepper motor and servo driver are done on an FPGA board from knjn.com (pluto-3).

TinyOS for 8051 based platforms such as Texas Instruments CC2430, Nordic Semi nRF24e1 and SiLab c8051F34x.

A kernel written by Merck Hung. IA32 architecture, 32-bit protected mode, Memory paging, Keyboard, Timer Interrupt Handling, and a simple kernel shell to operate. Written in C language, development under Linux environment.

A modular compiler for Tig in C++.

Converter from DOS-exe (MZ format) files to ROM-able (*.rom format), suitable for loading to absolute addresses. Can be used for create BIOS extenders for I/O card and another soft for x86-based embedded systems for big length files (more, than 64K).

TUSB3210 driver page and developer community.

...Two software packages are available: the Exosite barebones-template solution and a real-world example in the form of the Exosite BBQ Companion Combination. Both of these use-cases have code available for the Energia and Code Composer Studio IDEs. •Present Support: MSP430F5529 LaunchPad •Future Support: Tiva C Series TM4C123G LaunchPad •Required: CC3000 Wi-Fi Transceiver BoosterPack •Optional: ADS1118 BoosterPack (bonus Energia beta-library available) •GitHub Repository: https://github.com/a-whitehead/exositeLaunchPad Note: A free account on Exosite Portals is required: https://ti.exosite.com To discuss this code and more, visit: http://forum.43oh.com/topic/5108-energia-library-exosite-internet-of-things-visual-analytics-remote-monitoring/

This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform. Current version supports major POSIX systems (Linux, QNX). 2) Hardware_GEDF_Scheduler: is a hardware implementation in VHDL (targeting FPGAs) of the G-EDF multiprocessor scheduling policy.

An eco-system of RTSC-based embedded C/C++ components that furnish a rudimentary hardware abstraction layer comprising basic I/O and threading services which can support a wide-range of embedded platforms.

GalaxyIP (Galaxy Intellectual Property Cores) is a project devoted to accommodate a set of IP-Cores for embedded SoC development, based on the processor code named Voyager (StarTrek and the space probes).

Trying to run Linux on a T-Home IPTV Media Receiver

Implements read only access to ntfs and fat. It is targeted for the use in micro controllers (e.g. VNC2, ATMega) with few KBytes memory.

We are about to develop a tool(development kit) which can support developing embedded software by using USb transfer between target machine and development machine.

SimpleSerial is a little tool for using an serial device. It can be start as a deamon.

SW/HW project to allow controlling old computers such as C64 with wiimote and balance board.

The goal of Gossamer is to provide a set of libraries & tools for distributed, fault tolerant, computing. This is done by breaking tasks up into small units which are then processed by seperate servers, which may reside locally or across a network.

This project is software project using MCUs from Microchip and other MCU manufacturers. Currently planning on doing an SNMP agent on a few development MCU boards.

A free/libre/open-source firmware library (previously known as libopenstm32) for various ARM Cortex-M3 microcontrollers, including ST STM32, Toshiba TX03, Atmel SAM3U, NXP LPC1000 and others. Sourcecode and bugtracker can be found at http://github.com/libopencm3

Library for reading from mobile device sensors under Windows Mobile, such as an accelerometer and visible-light sensor, and some basic tools that utilize the information. Currently only supports HTC devices based on HTCSensorSDK.

Modular system to emulate any digital system you care to imagine. Add modules for input and output devices, processors, microcontrollers, etc.

Design and implementation of silicon and software for baseband processors conforming to IEEE wireless standards. Initial focus on WiMAX and WiFi.

This is an application that streams data from the Microsoft Kinect or cameras like it over a network. The program is Intended to be used in robotics applications where the controller cannot use such cameras directly due to hardware/software limitations--such as lacking usb ports or appropriate drivers--or in situations where the camera is not in close proximity to the device that needs to access it. Given that the controller can accept data from over the network, another embedded controller...