Portable OS X FOSS applications
OS X FOSS portable applications are packaged so you can carry around on any portable device, USB thumb drive, iPod, portable hard drive, memory card, other portable device (or also on your internal hard disk), taking your preferences with you.
A cross-platform, open-source, alternative to NIST REFPROP. Based on reference-accuracy equations of state and transport property correlations for refrigerants like Water, CO2, R134a, Nitrogen, Argon, Ammonia, Air, R404a, R410a, Propane and many others. A selection of secondary working fluid properties are also available. Can also make use of REFPROP when available. In addition, calculations for Humid Air Properties based on ASHRAE RP-1485 are provided. Wrappers are available for MATLAB, Octave, Python, C#, Fortran and many more.
BioSig is a software library for processing of biomedical signals (EEG, ECG, etc.) with Matlab, Octave, C/C++ and Python. A standalone signal viewer supporting more than 30 different data formats is also provided.
Virtual Sound Level Meter for analyzing calibrated sound files
This project is the MATLAB development of a virtual sound level meter. The program will read in a calibrated .wav file and allow the user to analyze it as one would analyze a sound field with a sound level meter. The software implements Fast, Slow, Impulse and LEQ; A, C and Flat Weighting; Ln and Noise Dose analysis; Octave and 1/3 Octave band analysis; high resolution FFT analysis and spectrograms. Band analysis can be made using fast FFT methods or slower, but ANSI standard methods. Source code requires MATLAB + Signal Processing Toolbox. Developed under MATLAB R2010a (but might work with some earlier versions) Executable version does not require MATLAB and runs under Windows XP, Vista, and Windows 7.
An open source software-defined GNSS receiver
An open source software-defined Global Navigation Satellite Systems (GNSS) receiver written in C++ and based on the GNU Radio framework.
Compile matlab mex files with gcc on Windows Platforms
Gnumex is a package that allows Matlab mex and engine files written in C, C++, Fortran 77 or Fortran 95 to be compiled with MinGW (or Cygwin) MS Windows versions of gcc, gfortran or g95.
Advanced mission simulation and analysis tool
The Orbit Determination Toolbox (ODTBX) is developed by the Navigation & Mission Design branch at NASA Goddard Space Flight Center as an advanced mission simulation and analysis tool used for concept exploration, proposal, early design phase, and/or rapid design center environments. ODTBX functions and utilities are combined in a flexible architecture that allows for modular development of navigation algorithms and simulations. The core ODTBX functionality is realized through a set of estimation commands that incorporate Monte Carlo data simulation, linear covariance analysis, and measurement processing at a generic level.
Yet Another Audio Feature Extractor is a toolbox for audio analysis. Easy to use and efficient at extracting a large number of audio features simultaneously. WAV and MP3 files supported, or embedding in C++, Python or Matlab applications.
This project, developed at UCL London, provides code for tomographic reconstruction. NiftyRec is written in C and has Python and Matlab extensions. Computationally intensive functions have a GPU accelerated version based on CUDA.
A library providing easy, flexible, and efficient read/write access to video files using a wide variety of codecs in MATLAB on Windows and GNU/Linux platforms, using DirectShow and ffmpeg backends, respectively. Also provided are 'load' and 'imread' for bulk reading.
A neural network package for Octave! Goal is to be as compatible as possible to the one of MATLAB(TM).
The collection of MATLAB compatible routines for Mechanical Trading Systems. Released ta-lib - MATLAB MEX API to www.ta-lib.org . Related projects: http://sourceforge.net/projects/wlmllink and http://sourceforge.net/projects/algotrade.
Massive Object Tracking Software (Matlab/Python)
TracTrac is a Particle Tracking Velocimetry (PTV) software which is extremely fast (more than 10k points tracked per second, 100k under python) and accurate (up to 0.01 pixel resolution), forming thus a good concurrent to the state-of-the art PIV/PTV algorithms. It allows to track anything that moves: birds, ants, grains, water flows... It runs on Python (v2.7 with OpenCV2) or Matlab (>2012a with Image Processing toolbox). Give it a try !
GPLAB is a Genetic Programming Toolbox for MATLAB
The Auditory Modeling Toolbox is a community effort to build a simple and well tested toolbox for doing auditory modelling in Matlab, Octave, Python and C. Over 30 models and data sets from the area of hearing science are provided.
The Janelia Automated Animal Behavior Annotator
The Janelia Automatic Animal Behavior Annotator (JAABA) is a machine learning-based system that enables researchers to automatically compute interpretable, quantitative statistics describing video of behaving animals. Through our system, users encode their intuition about the structure of behavior by labeling the behavior of the animal, e.g. walking, grooming, or following, in a small set of video frames. JAABA uses machine learning techniques to convert these manual labels into behavior detectors that can then be used to automatically classify the behaviors of animals in large data sets with high throughput. JAABA combines an intuitive graphical user interface, a fast and powerful machine learning algorithm, and visualizations of the classifier into an interactive, usable system for creating automatic behavior detectors. Documentation is available at: http://jaaba.sourceforge.net/
Real time signature verification using MATLAB and C#
Online Signature Verification technology requires primarily a digitizing tablet and a special pen connected to the USB port of a computer. An individual can sign on the digitizing tablet using the special pen regardless of his signature size and position. The signature is characterized as pen-strokes consisting x-y coordinates and pressure with the data being stored in a signature database. Dynamic time warping (DTW) and quadratic discriminant analysis (QDA) is used to get results where the system accepts 2% of forged signatures and rejects 5% of true signatures
The Dutchroll project provides Open Source applications for Matlab and Simulink, with the emphasis on aerospace engineering. The main application is the Flight Dynamics and Control toolbox; other applications will be derived from that toolbox.
The Databionics ESOM Tools offer many data mining tasks using Emergent Self-Organizing Maps. Visualization, clustering, and classification of high-dimensional data using databionics principles can be performed interactively or automatically.
The KUKA Control Toolbox (KCT) is a collection of MATLAB functions developed at the University of Siena, for motion control of KUKA robot manipulators.
Provides pre-compiled MEX functions that wrap around the libsvm C library. Many enhancement are applied to the C version of the library to speed up Matlab usage. 64-bit only.
A high-level python to matlab(tm) bridge. Let's matlab look like a normal python library.
An easy to install and use toolbox for octave for the calculation purpose of power system along with features like Economic load dispatch, load flow analysis, transmission line parameter and swing equation etc
Monitor de impresiones gratuito
Free Print Monitor es un monitor de impresiones gratuito para entornos Windows escrito en Matlab. Está pensado para ser utilizado en pequeñas comunidades que requieran de un sistema automático de cobro de impresiones. Caso práctico: Ordenador público conectado a una serie de impresoras. Con Free Print Monitor usted podría listar un conjunto de usuarios cuya actividad en el centro de impresión quedaría cobrada y registrada sin apenas mantenimiento. Para que el programa funcione correctamente es IMPRESCINDIBLE la instalación de los siguientes programas: - MCRInstaller: Contenido en carpeta Dependencias - PaperCut Print Logger: http://www.papercut.com/products/free_software/print_logger/spanish/ Changelog nueva versión: - Aumento de la velocidad en un 80% - Soporte multi idioma - Máscara de contraseña Espero que, con todos sus defectos, este programa y sus futuras versiones le sean de utilidad tanto o más que a mí mismo. Álvaro Romero Calvo
Bifurcation analysis for delay-differential equations
DDE-BIFTOOL is a set of routines for performing numerical bifurcation analysis of delay-differential equations, running in Matlab or Octave. It was originally created by Koen Engelborghs at KU Leuven (Belgium).  Tutorial demo <http://ddebiftool.sourceforge.net/demos/neuron/html/demo1_simple.html> shows the output of an illustrative demo. <http://ddebiftool.sourceforge.net> links to documentation, a list of contributors and current maintainers. The original DDE-BIFTOOL webpage at KU Leuven  stores versions up to 3.0 and their documentation.  <http://twr.cs.kuleuven.be/research/software/delay/ddebiftool.shtml>  <https://www.gnu.org/software/octave> Further tutorials (by M Bosschaert) at <https://sites.google.com/a/uhasselt.be/maikel-bosschaert/home> (pdf files).