This small program can help you to calculate optimal cut of rectangular details. It can be used to design cutting out of wood, glass, steel and other material.
ScadaBR is a SCADA (Supervisory Control and Data Acquisition) system with applications in Process Control and Automation, being developed and distributed using the open source model.
This is mainly just an interface tweak. Added function of mac address changer. If you have problems getting the mac changer to work, try using a mac address that starts with something other than "00" in the first octet. If you are intersted in learning about network security please check out my Juniper Networks training course at: http://academy.gns3.com/courses/juniper-jncia-intro-to-junos
PLC-Logger and Analyzer
Use PLC-logger to store and analyze data from almost every PLC-system. The following PLC-Systems are accessible: - Every PLC-System running a Modbus-TCP / Modbus-UDP Server - Siemens S7 via IBH NetLink - Siemens S7 with Ethernet-Interface - Codesys-based PLC-Systems - via OPC-Servers V0.61: - Bugfixes V0.60: - Some Bugfixes - Some data evaluation V0.59: - Modbus TCP Server Simulator supports Modbus UDP - Possibility to set bookmarks V0.57: - Modbus UDP supported - Edit configuration from connection-manager - Configuration keeps selected after starting or stopping V0.56 HF1: - Bugfix executing EasyModbusTCP Server Simulator V0.56: - Integration of EasyModbusTCP Server Simulator in "Tools"-Menue - Improvements in Modbus-Connection Wizard - Modbus Addresses shifted by (-1) to meet Modbus specification
A software for upload .hex files to ATMEGA328P and compile .asm files
Packing two dimensional rectangular elements at orthogonal table
Program was created for optimized packing of two dimensional rectangular elements at orthogonal table with main purpose of printing cutting sheets that can be used for cutting material at production in wood and panel furniture manufacturing. It is developed upon authors several years of expirience at woodworking, and actual carpenters needs when such software is in question. Inspite its look it is fully functional peace of software , with all necessary elements needed for generating cutting sheets. GUI is simple and it consists of fields for entering table and element dimensions on the right, packing, optimization, cutting and cleaning table edges options section bottom left and statistic section bottom right. Upper left are table description field and cut sheet drawing at the center. Right click at the cut sheet drawing and there are printing options. NOTICE : This program was not created for sellers of chipboards and other board materials. All the best, Author
This project will create a series of .dll files that connect with AutoCAD environment and add functionality like advanced e-learning platform, vizualisation tools and additional import/export support. This will be .NET programming.
Set of module for data processing of wireless device
The goal is to create a leading “Set of software libraries for data processing of wireless device based on Coronis platform“. These libraries will run on all major platforms (embedded and desktop) and provide services for data processing through generic APIs. Keywords: Coronis, Wavenis, API, Plugin, Wireless, Waveport, Wavecard, Profile, Java, C, C++, C#
a tool for process identification and controller design
ePICC (easy Process Identification and Controller Configuration) is a Open-Source-Solution for quick controller configuration on Siemens SIMATIC S7-PLCs. It creates a mathematical model of the process and let you choose from a variety of controllers.
A Crossplatform OpenGl Gui for a Accelerometer (via USART/Atmega).
Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm
Gesture based movement with CATIA
This project provides a gesture based movement of part objects in the CAD-system CATIA. It is possible to rotate, move or zoom in or out. Further there is a rudimentary speech recognition to change the rotating axes or to do some other helpful things. KinectCAD has been written in Visual C# 2010. The package includes the source code and binaries files. To start KinectCAD it is necessary to have a correct installed Microsoft Kinect. Also it is helpful if there is an installed Kinect SDK V1. But you can also download the Runtime at: http://download.microsoft.com/download/E/E/2/EE2D29A1-2D5C-463C-B7F1-40E4170F5E2C/KinectRuntime-v1.0-Setup.exe Important! The program is still in development! In future there will be several updates. Until now there is a handbook and several other documents to understand KinectCAD which are not translated to english but in the near future I will translate them. http://www.youtube.com/watch?v=A3ZYCyCt75g If there are questions or problems mail me.
Symulacja procesów cieplnych zachodzących w pomieszczeniach
Program tworzony w ramach przedmiotu "Projekt Grupowy" na Politechnice Gdańskiej. Skład: inż. Adam Banaś inż. Maciej Gajdzica inż. Adam Lasota inż. Damian Pawlus inż. Włodzimierz Kaoka Opiekun projektu: mgr inż. Piotr Fiertek Celem projektu jest stworzenie środowiska symulacyjnego dla procesów termicznych zachodzących w pomieszczeniach. Integralną jego częścią jest implementacja algorytmów obliczeniowych na procesorach graficznych GPU przy użyciu standardów CUDA oraz OpenCL. Innymi ważnymi elementami są graficzna wizualizacja wyników z wykorzystaniem biblioteki graficznej OpenGL oraz stworzenie interfejsu użytkownika umożliwiającego zmianę parametrów symulacji.
Publishing DWG to PDF made simple
Users of AutoCAD are familiar with the "publish" command used to plot multiple drawings to PDF. The purpose of my program is to simplify publishing by doing the publishing with the AutoCAD Core Console (accoreconsole.exe), add automatic date stamps to the output file names, and allowing the user to publish multiple sets in series or in parallel. The console is significantly faster than using regular AutoCAD, and publishing through the console doesn't tie up AutoCAD. One can publish drawings in the background while still using AutoCAD. The ability to queue publishing jobs also means one doesn't need to babysit the computer while publishing. Queue up 20 sets, hit Publish, and walk away from the computer. All of the PDF files will be waiting for you when you come back. The ability to publish multiple jobs in parallel can dramatically speed up the publishing process, but a solid state hard drive is strongly recommended.
A set of tools relating to an educational processor used in teaching Computer Architecture at the University of Ottawa. Currently includes a working assembler and a semi-functional emulator/debugger.
Parser library that uses an EBNF like grammar to generate a parse tree
Parser library that uses an EBNF like grammar to generate a parse tree You can use it to create a quick parser It uses backtracking so it may be slow for some grammar rules
Support program for estimating in building construction
Програма за преглед, редактиране и създаване на строителни анализи. Програмата ще е помощен инструмент, към: - софтуер за офериране - софтуер за база данни от строителни анализи
Design of Steel Column Base Supported on Concrete Padestal
BasePlate01 is a C# based program for design of structural base of Steel Columns supported on Concrete Padestals. The program is based on AISC LRFD Code.
Sistema de Bilhete Único para o transporte público urbano de passageiros. Contempla ponto de venda dos cartões (contactless card) e créditos, validador embarcado, cartão de memória para coleta dos dados e todos os softwares em versão alfa.
Front End for a generic CyberOPC Server based on the free CyberOPCServerLibrary. It is free opensource a kepware-like interface using a server generated with the CyberOPCServerLibrary. (www.cyberopc.org)
Graphical interface to create and simulate OpenDSS projects
A free RBS(Rule based system) that work oon fuzzy set theory.
The project goal is realize a framework able to manipulate knowledge stored via fuzzy set. In order to do that the framework must allow fuzzy data manipulation and conversion from and to fuzzy set.
This projects offers a set of Binary and Text persistence file-based classes. It provides Fixed-lenght and variable-length record support. Indexed files are supported as well.
Use of iso15926 part 9 in an sample engineering workflow.
*Project home now moved to Google Code.* Numerical computing and plotting tools for IronPython.