The files required to run GTK+ applications on Windows
This is the GTK+ Runtime Environment Installer for Windows. It includes all of the files required to run GTK+ applications on Windows. Some support tools are also available.
A multi-platform software synthesiser emulating (somewhat inaccurately) pre-GM MIDI devices such as the Roland MT-32, CM-32L, CM-64 and LAPC-I. In no way endorsed by or affiliated with Roland Corp. Source hosted at: http://www.github.com/munt/
Poppler/PopplerQt5 pre-built binaries for Win32 GCC
Poppler Win32 are pre-built binaries of the Poppler library, it includes libpoppler.dll.a and libpoppler-qt5.dll.a. We made these pre-built binaries since building Poppler (Especially with Qt5 support) is hard and not fully supported on Microsoft Windows. Poppler Win32 was tested using Qt 5.2.1 and Mingw32. "Poppler is a PDF rendering library based on the xpdf-3.0 code base."
Gtk 2&3 for Windows (MinGW)
New home to HbQt, HbIDE & HbDBU once Harbour SVN hosted contribs.
This is the repository to host all those Harbour's contrib libraries and applications which could not comply with strict Harbour project goals but had the potentiality to march into the future. The goal is to keep this repository parallel with Harbours contrib and use the same build system which Harbour uses. This way it will be possible easily to shift any library/application from here to Harbour or vice-verse. As I am totally ignorant of Harbour's build system, it will be appreciated if someone knowledgeable take over this responsibility, which might be one-time task. Welcome to new chapter in Harbour history! Pritpal Bedi a student of software analysis & concepts
library to read dwg & read/write dxf files
c++ library to read/write DXF files in binary and ascii form and to read DWG from r14 to v2015
Extending standart QLUA
This library is developing by users of QLUA. Main purpose - make it easier and faster to write add-ons for Quik using LUA.
This project consists of a linux kernel driver and some user-mode libraries. They allow a process to create a virtual usb host controller. Real or virtual usb devices can be "plugged" into this controller.
Packages to create a Unix like environment under MS-Windows
At this point this project is mainly wpkg which is a replica of dpkg and apt-get that works under Microsoft Windows and Unices. Since version 0.7.0 it works very nicely as it includes most of the important functionality of dpkg (i.e. most everything except dselect functions.) Otherwise, the Unix GNU Windows is expected to be a large set of packages that wpkg can handle. Packages of all the software available under MinGW and GnuWin32 so you can painlessly build a complete Unix like environment under Microsoft Windows.
Extracts plain text from documents in all popular formats.
SILVERCODERS DocToText is a powerful utility that can convert documents to plain text. It includes a console application and C/C++ library, which allows embedding text extraction mechanisms into other applications. It supports MS Office binary formats: MS Word (DOC), MS Excel (XLS, XLSB), MS PowerPoint (PPT), Rich Text Format (RTF), OpenDocument (also known as ODF and ISO/IEC 26300, full name: OASIS Open Document Format for Office Applications): text documents (ODT), spreadsheets (ODS), presentations (ODP), Office Open XML (ISO/IEC 29500, also called OOXML, OpenXML or MSOOXML) documents: MS Word (DOCX), MS Excel (XLSX), MS PowerPoint (PPTX), iWork, ODFXML (FODP, FODS, FODT), PDF, EML (emails) and HTML. DocToText can be also used for searching, indexing archiving, as a fast console viewer or to recover text from corrupted documents. It can also extract text from annotations (comments) and read metadata like author, last modification date or number of pages.
MIDI libraries for Qt5/C++
Drumstick is a tool to play music. This is a set of C++ MIDI libraries using Qt5 objects, idioms and style. It contains a C++ wrapper around the ALSA library sequencer interface; ALSA sequencer provides software support for MIDI technology on Linux. A complementary library provides classes for SMF (Standard MIDI files: .MID/.KAR), Cakewalk (.WRK), and Overture (.OVE) file formats processing. A multiplatform realtime MIDI I/O library is also provided.
This project has moved to GitHub https://github.com/Zipios/Zipios Zipios is a C++ library for reading and writing Zip archive files. Access to the data of individual entries is provided through standard C++ iostreams. A simple read-only virtual file system that mounts regular directories and zip files is also provided.
A C++ library for artificial neural network computations
FCNN (Fast Compressed Neural Networks) is a free open source C++ library for artificial neural network computations. It is easy to use and extend, written in modern C++ and is very fast. All FCNN classes are templated to support both single and double precision computations. Internal representation of network in FCNN differs from all other libraries allowing true code modularisation with simultaneous speed improvements. In order to further improve the speed of computations FCNN employs BLAS and OpenMP.
An open-source library to support Stanford's course 'Programming Abstractions', CS106B/X. Written initially for Linux, but porting to Windows/MinGW is planned.
An attempt to create a cross platform QT compatible serial port driver This code attempts to supports signal event driven design.
QASreport - is a multi-platform C ++ Qt library for building reports
QASreport - is a multi-platform C ++ Qt library that contains a set of classes for building reports. It is a mix of designer and report generator output means. It is intended to add to the application of automation to create, save, report output. Reports templates are stored in XML format. And can be stored and loaded from a file on disk, memory, or table blob fields. The library contains built-in designer, available in run-time, with the ability to work like a normal graphic editor. Possible conclusion of the tables of any SQL database, which is connected to the driver. And the output of any source data models, inherited from QAbstractItemModel.
The serial LCD module using ATmega8 along with easy arduino library.
serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is required to communicate with serialLCD module. The library & firmware file is released in public domain as open-source project. Feel free to edit/improve/share it. *** Raspberry Pi python library added. video available on youtube at: http://youtu.be/adNOWREWuL8
Generic C++ database connectivity class library
A C++ database connectivity class library supporting different database management systems under a simple interface. The API is hiding implementation details from developers, so class usage is same for each database management system.
dbus-cxx is a C++ wrapper for dbus. It exposes the C API to allow direct manipulation and relies on sigc++ to provide an OO interface. Also included is dbus-cxx-xml2cpp to generate proxy and adapter interfaces from DBus XML introspection-like documents.
This project has moved to https://github.com/lipnitsk/libcue
Audio Recorder ActiveX makes it easy adding sound recording
Audio Recorder ActiveX control developed by MOX Software that makes it easy adding sound recording capabilities to applications written with the most widely-used development environments that accept ActiveX controls such as Visual Studio and Visual Studio.NET Download PHP Scripts : http://microcode.ws/ Cheap Web Hosting + FREE Domain : http://goo.gl/HY7Ubq
A small and simple library for reading and parsing MARC (bibliographic ISO-2709) records quickly. If you need to read and parse MRC files - it is that suits you.
C++ lightweight cross-platform game engine
PVLE is a C++ lightweight cross-platform game engine (real-time visualisation/simulation engine), using OSG (OpenSceneGraph) and ODE (OpenDynamicsEngine) among other libs. It differs from other engines in the way it does not hide underlaying libraries.
Library of linguistic tools
Voikko is a spell checking, grammar checking, morphological analysis and hyphenation system. Spell checkers are available for multiple languages, other features for Finnish only.
Java to C++ porting framework