Search Results for "serial port tester"
Sort By:
16 programs for "serial port tester" with 1 filter applied:
-
Auth0 Free: 25K MAUs + 5-Min SetupProduction-ready login in 10 lines of code. SSO, MFA & social auth included. Scale seamlessly beyond free tier with Okta’s enterprise security.
-
Secure remote access solution to your private network, in the cloud or on-prem.OpenVPN is here to bring simple, flexible, and cost-effective secure remote access to companies of all sizes, regardless of where their resources are located.
-
1
comini
RS232 base monitoring
serial RS232 communication on PC computer -
2
libnexstar
C API to control NexStar compatible telescopes
This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
3
openGalaxy
SIA receiver for Galaxy security control panels.
This project aims to provide a method for listening on a serial port and decode incoming messages from a Galaxy security control panel. The messages are transmitted using the SIA DC-03-1990.01 (R2000.11) protocol. The decoded messages are stored in a database (MySQL) or forwarded by email using ssmtp. Besides just listening for messages openGalaxy can also be used to arm/disarm the panel and much more... This software is still in a testing (beta) phase but has been tested successfully... -
4
-
Payroll Services for Small Businesses | QuickBooksEasily pay your team and access powerful tools, employee benefits, and supportive experts with the #1 online payroll service provider. Manage payroll and access HR and employee services in one place. Pay your team automatically once your payroll setup is complete. We'll calculate, file, and pay your payroll taxes automatically.
-
5
NexStarCtl
Cross platform Perl API to control NexStar compatible telescopes
This module implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port... -
6
nexbridge
Makes Celestron mounts controlable over the network
... serial port emulator with software like Stellarium, to control the network exported telescopes. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. It can publish the service using mDNS as XXX._nexbridge._tcp.local. where XXX is user specified name with "-s" option. Now ttynet tool is added which connects a virtual serial port to a network exported serial port. -
7
Work with DDS AD9850 from script VBS
Work with DDS AD9850 from a script VBS
VBS script designed to directly enter the frequency of the output signal of the numeric keys '0..9' on the keypad and sending commands to the COM port with voice. The marker button start and end of the input assigned to the key 'Q'. Interaction with the DDS goes through the module Arduino Nano via the serial interface over USB (or Bluetooth or Wi-Fi over UART). Thanks to the module also becomes possible battery life DDS, because saving and restoring settings by using basic chip EEPROM... -
8
comStudio
Serial communication utility
COM Studio utility helps to develop and test a serial communication protocol for embedded application like USART or RS232. COM studio is a cross platform application developed on top of QSerial device using the QT library. With COM studio is possible to create a set of command frames to be sent to the COM port and decode the answers coming from the device. The serial protocol can be fully customized with a graphical user interface. This software is OPEN SOURCE and released under GPL... -
9
Gcomm is a serial communications program similar to seyon, but more modern, and easier to use. Works over serial port, via TCP/IP, or a pipe through another program. Supports xmodem/ymodem/zmodem protocols. Visit the gcomm.sourceforge.net home page for
-
Top-Rated Free CRM SoftwareHubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
10
FUNterm is a serial port terminal program for Windows. It offers basic serial connection. Because FUNterm is written using basic Win32 calls, with no high-level libraries, it works under Linux using Wine. The serial driver can be used separately.
-
11
An attempt to create a cross platform QT compatible serial port driver This code attempts to supports signal event driven design.
-
12
libserial This library provides a C++ multithreading encapsulation for serial port ioctls. Also, it provides buffering mechanisms in order to support active rs232 devices
-
13
This project develops a software for control of digital photo cameras, which offer a serial (RS232 compatible) port for remote control (e.g. Casio QV series).
-
14
Micro-80 aims to simulate a Z80 homebrew computer down to the bare metal: 64K RAM, ADM-3A terminal, parallel port, serial port and...3.5" 1.44MB floppy drive?!
-
15
This project entails (initially) the development of a command-line Unix/POSIX utility (in C) that can communicate with LED signs (such as the BetaBrite) using the ALPHA Sign Communications Protocol (ASCP over a serial port.
-
16
bldc
BLDC ESC
Brushless DC controller (ESC) Fully functional sensorless ESC. Uses BEMF detecton for rotor position sensing. Software trays to maintain maximum speed on currently available power(pwm duty). It works like ordinary DC motor. More load means, on same power, lower speed and higer current. Motor speed (current) PWM , direction etc. is adjustable via serial port commands. For example - press "k" button to add power, "j" button to reduce power and "t" button to reverse rotor...
- Previous
- You're on page 1
- Next