Search Results for "/arm-elf-tools-20030314.sh"
Sort By:
Showing 38 open source projects for "/arm-elf-tools-20030314.sh"
View related business solutions-
Monitor the status and performance of any IT environment with NMISTrusted by thousands of IT teams worldwide, The NMIS platform offers comprehensive network management, handling faults, performance, and configurations with ease.
-
Secure remote access solution to your private network, in the cloud or on-prem.OpenVPN is here to bring simple, flexible, and cost-effective secure remote access to companies of all sizes, regardless of where their resources are located.
-
1
cri-tools
CLI and validation tools for Kubelet Container Runtime Interface (CRI)
CLI and validation tools for Kubelet Container Runtime Interface (CRI). cri-tools aims to provide a series of debugging and validation tools for Kubelet CRI. It's recommended to use the same cri-tools and Kubernetes minor version, because new features added to the Container Runtime Interface (CRI) may not be fully supported if they diverge. cri-tools follows the Kubernetes release cycles with respect to its minor versions (1.x.y). Patch releases (1.x.z) for Kubernetes are not in sync with those... -
2
Docker tools
Useful tools when you are running your project inside docker container
Running a DNS service for docker containers always messes with the DNS settings of your workstation. Especially if these DNS/discovery services themselves run inside docker containers on an active development workstation. Resolving DNS issues is not an easy task. Contrary to that the hosts file is simple. The script first removes all existing entries of all the hostnames of containers created by docker-compose. Configure the environment variables in your .env file. That way it can be used by... -
3
crun
A fast and lightweight fully featured OCI runtime and C library
A fast and low-memory footprint OCI Container Runtime fully written in C. While most of the tools used in the Linux containers ecosystem are written in Go, I believe C is a better fit for a lower-level tool like container runtime. runc, the most used implementation of the OCI runtime specs written in Go, re-execs itself and uses a module written in C for setting up the environment before the container process starts. crun aims to be also usable as a library that can be easily included... -
4
Geodesic
Geodesic is a DevOps Linux Toolbox in Docker
Geodesic is a robust Linux toolbox container, crafted to optimize DevOps workflows. This container comes fully loaded with all essential dependencies for a complete DevOps toolchain. It's designed to bring consistency and boost efficiency across development environments. It achieves this without the need for installing additional software on your workstation. Think of Geodesic as a containerized parallel to Vagrant, offering similar functionality within a Docker container context. -
The Fastest Observability Platform for IT, Apps, and Cloud | LogicMonitorLogicMonitor’s SaaS-based observability platform empowers ITOps, developers, MSPs, and business leaders to monitor networks, applications, and cloud environments seamlessly. Gain full data center visibility, powerful dashboards, and flexible alerting to bridge the gap between tech and teams – all with AI-driven insights. Trusted by leading enterprises, LogicMonitor cuts troubleshooting time, boosts innovation, and delivers extraordinary employee and customer experiences. Transform IT operations with a solution built for modern businesses.
-
5
Liqo
Enable dynamic and seamless Kubernetes multi-cluster topologies
... for you. Seamless workloads offloading to remote clusters, without requiring any modification to Kubernetes or the applications themselves. Multi-cluster is made native and transparent: collapse an entire remote cluster to a virtual node compliant with the standard Kubernetes approaches and tools. Transparent multi-cluster pod-to-pod and pod-to-service connectivity, regardless of the underlying configurations and CNI plugins. -
6
DevOps
Contains learning resources related to DevOps tools and tech
I created this repository to keep my learning, notes, and code in one place for various tools in DevOps. Now, it's helping thousands of learners, practitioners, and professionals every day in their DevOps journey. -
7
Moby
Project for the container ecosystem to assemble containe-based systems
..., OS, container runtime, orchestration, infrastructure management, networking, storage, security, build, image distribution, etc. Tools to assemble the components into runnable artifacts for a variety of platforms and architectures: bare metal (both x86 and Arm); executables for Linux, Mac and Windows; VM images for popular cloud and virtualization providers. -
8
Aria2 AriaNg Docker
The Docker image for Aria2 + AriaNg + File Browser + Rclone
One Docker image for file downloading, managing, sharing, as well as video playing and evening cloud storage synchronization. Furthermore, it's pretty small and ARM CPU compatible which means you can also run it on Raspberry Pi. Last but not least, Auto HTTPS can't be more easy. -
9
Kube-Hetzner
Optimized and Maintenance-free Kubernetes on Hetzner Cloud
A highly optimized, easy-to-use, auto-upgradable, HA-default & Load-Balanced, Kubernetes cluster powered by k3s-on-MicroOS and deployed for peanuts on Hetzner Cloud. Hetzner Cloud is a good cloud provider that offers very affordable prices for cloud instances, with data center locations in both Europe and the US. This project aims to create a highly optimized Kubernetes installation that is easy to maintain, secure, and automatically upgrades both the nodes and Kubernetes. We aimed for... -
Build Securely on AWS with Proven FrameworksMoving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
-
10
Kata Containers
Build a standard implementation of lightweight Virtual Machines (VMs)
... of Intel Clear Containers with Hyper.sh RunV and scaled to include support for major architectures including AMD64, ARM, IBM p-series, and IBM z-series in addition to x86_64. Kata Containers also supports multiple hypervisors including QEMU, Cloud-Hypervisor, and Firecracker, and integrates with the containerd project among others. -
11
My Home Operations Repository
Wife approved HomeOps driven by Kubernetes and GitOps using Flux
This is a mono repository for my home infrastructure and Kubernetes cluster. I try to adhere to Infrastructure as Code (IaC) and GitOps practices using tools like Ansible, Terraform, Kubernetes, Flux, Renovate, and GitHub Actions. -
12
cdebug
A swiss army knife of container debugging
A swiss army knife of container debugging. Execute commands or start interactive shells in scratch, slim, or distroless containers, with ease. The cdebug exec command is a crossbreeding of docker exec and kubectl debug commands. You point the tool at a running container, say what toolkit image to use, and it starts a debugging "sidecar" container that feels like a docker exec session to the target container. -
13
kpt Kubernetes
Automate Kubernetes Configuration Editing
kpt is a package-centric toolchain that enables a WYSIWYG configuration authoring, automation, and delivery experience, which simplifies managing Kubernetes platforms and KRM-driven infrastructure (e.g., Config Connector, Crossplane) at scale by manipulating declarative Configuration as Data. -
14
Robusta
Kubernetes observability and automation
Keep your Kubernetes microservices up and running. Connect your existing Prometheus, gain 360° observability. Robusta is both an automation engine for Kubernetes and a multi-cluster observability platform. Robusta is commonly used alongside Prometheus, but other tools are supported too. By listening to all the events in your cluster, Robusta can tell you why alerts fired, what happened at the same time, and what you can do about it. Robusta can either improve your existing alerts or be used... -
15
ContainerSSH
ContainerSSH: Launch containers on demand
An SSH Server that Launches Containers in Kubernetes and Docker. Building a lab environment can be time-consuming. ContainerSSH solves this by providing dynamic SSH access with APIs, automatic cleanup on logout using ephemeral containers, and persistent volumes for storing data. Perfect for vendor and student labs. Provide production access to your developers, give them their usual tools while logging all changes. Authorize their access and create short-lived credentials for the database using... -
16
CRI-O
Open Container Initiative-based implementation of Kubernetes Container
..., deprecation or removal. This also applies to features that are independent of Kubernetes. Nevertheless, feature backports to supported release branches, which are independent from Kubernetes or other tools like cri-tools, are still possible. This allows CRI-O to decouple from the Kubernetes release cycle and have enough flexibility when it comes to implementing new features. Every feature to be backported will be a case-by-case decision of the community. -
17
youki
A container runtime written in Rust
youki is an implementation of the OCI runtime-spec in Rust, similar to runc. Rust is one of the best languages to implement the oci-runtime spec. Many very nice container tools are currently written in Go. However, the container runtime requires the use of system calls, which requires a bit of special handling when implemented in Go. This is too tricky (e.g. namespaces(7), fork(2)); with Rust, it's not that tricky. And, unlike in C, Rust provides the benefit of memory safety. While Rust... -
18
Deckhouse
Kubernetes platform from Flant
Deckhouse is a Kubernetes platform that allows you to create homogeneous K8s clusters on any infrastructure. It manages clusters comprehensively and “automagically” and provides all necessary modules and add-ons for autoscaling, observability, security, and service mesh implementation. Deckhouse has vanilla Kubernetes under the hood and integrates a balanced set of Open Source tools that have become the industry standard. Out-of-the-box secure configuration of the Kubernetes cluster, least... -
19
Argo CD Image Updater
Automatic container image update for Argo CD
Argo CD Image Updater is a tool to automatically update the container images of Kubernetes workloads which are managed by Argo CD. In a nutshell, it will track image versions specified by annotations on the Argo CD Application resources and update them by setting parameter overrides using the Argo CD API. Currently, it will only work with applications that are built using Kustomize or Helm tooling. Applications built from plain YAML or custom tools are not supported yet (and maybe never will). -
20
PaaSTA
An open, distributed platform as a service
... to run and then ensures that those services are deployed safely, efficiently, and in a manner that is easy for the teams to maintain. Rather than managing Kubernetes YAML files, PaaSTA provides a simplified schema to describe your service and in addition to configuring Kubernetes it can also configure other infrastructure tools to provide monitoring, logging, cost management etc. -
21
Kapitan
Generic templated configuration management for Kubernetes
... capabilities, and native secret management tools offer granular control, fostering consistency, reducing errors, and safeguarding sensitive data. Empower your team to make changes to your infrastructure whilst maintaining full control, with a GitOps approach and full transparency. -
22
Kube-OVN
A Bridge between SDN and Cloud Native (Project under CNCF)
If you miss the good old days of SDN, then Kube-OVN is your choice in Cloud Native era. Kube-OVN, a CNCF Sandbox Level Project, integrates the OVN-based Network Virtualization with Kubernetes. It offers an advanced Container Network Fabric for Enterprises with the most functions, extreme performance and the easiest operation. Each Namespace can have a unique Subnet (backed by a Logical Switch). Pods within the Namespace will have IP addresses allocated from the Subnet. It's also possible for... -
23
meshery
Meshery, the cloud native manager
Meshery seamlessly integrates with every CNCF project, your existing tools and Kubernetes clusters. This integration empowers you to enhance the use of your preferred monitoring, CI/CD and security solutions. Meshery's Kubernetes-native approach means you can easily incorporate Meshery into your existing workflow without additional setup or integration effort. A self-service engineering platform, Meshery, is the open source, cloud-native manager that enables the design and management of all... -
24
MetalLB
A network load-balancer implementation for Kubernetes
... in the “pending” state indefinitely when created. Bare-metal cluster operators are left with two lesser tools to bring user traffic into their clusters, “NodePort” and “externalIPs” services. Both of these options have significant downsides for production use, which makes bare-metal clusters second-class citizens in the Kubernetes ecosystem. MetalLB aims to redress this imbalance by offering a network load balancer implementation that integrates with standard network equipment. -
25
LINKERD
Ultralight, security-first service mesh for Kubernetes
... and lots of diagnostics and debugging tools. Transparently add mutual TLS to any on-cluster TCP communication with no configuration. Designed by engineers, for engineers.