Open Source BSD Computational Fluid Dynamics (CFD) Software

OpenFOAM - The Open Source CFD Toolbox. OpenFOAM is a generic, programmable software tool for Computational Fluid Dynamics (CFD). For more information, see: - Main Website: https://openfoam.org - C++ Source Documentation: https://cpp.openfoam.org - Issue (Bug) Tracking: https://bugs.openfoam.org - User Guide: https://cfd.direct/openfoam/user-guide

cfMesh is an open-source library for volume mesh generation based on OpenFOAM. It implements various meshing workflows for volume mesh generation needed for CFD simulations with OpenFOAM. It is already a part of foam-extend, OpenFOAM for Windows, Caelus and OpenFOAM+ released by ESI. This repository is intended for contribution and collaborative development. If you have a new meshing algorithm or interested in contributing to cfMesh, do not hesitate to contact us. Please note that this code is not the same as CF-MESH+, which is a commercial product offered by Creative Fields Holding.

The goal of this project is to open the OpenFOAM CFD toolbox to community contributed extensions. Visit https://sourceforge.net/p/openfoam-extend/wiki/Home/ for more information. OPENFOAM(R) is a registered trademark of OpenCFD Limited.

The ADFC code is a computational fluid dynamics (CFD) C++ solver for incompressible viscous flow over 2D and 3D geometries. It uses finite element and the characteristic method on unstructured meshes to solve Navier-Stokes equations.

OpenFVM is a general open source three-dimensional Computational Fluid Dynamics (CFD) solver (for Linux and Windows). It uses the unstructured finite volume method to simulate non-isothermal transient flow. Gmsh is used for pre- and post- processing.

Gerris is a tool for generic numerical simulations of flows (CFD), in geometrically complex geometries and including adaptive, multiphase and interfacial flows capabilities.

OpenVLAB is an open source integrated framework for the numerical simulation of fluid flows (CFD) based on the resolution of Navier-Stokes equations. It is designed for analysis, design & optimization on airfoils, wings, wind-turbine, and much more..

OpenFlower is a free and open source CFD code (for Linux and Windows) mainly intended to solve the turbulent incompressible Navier-Stokes equations with a LES approach. It can deal with arbitrary complex 3D geometries with its finite volume approach.

ENGRID is a mesh generation software with CFD applications in mind. It supports automatic prismatic boundary layer grids for Navier-Stokes simulations and has a Qt based GUI.

The DUNS (Diagonalized Upwind Navier-Stokes)code is a 2D/3D, structured, multi-block, multi-species,reacting, steady/unsteady, Navier Stokes fluid dynamics code with q-omega turbulence model. It currently uses a diagonalized ADI procedure with upwind diff

PRIN-3D (PRoto-code for Internal flows modeled by Navier-Stokes equations in 3-Dimensions) is a CFD code written in MATLAB, with turbulent and reactive capabilities.

open source Aerodynamics and 3-D CFD software (RANS, VLES, DNS) for compressible turbulent flows: 1.0.2 version with GUI (mar 2012)

RANSFOIL is a console program to calculate airflow field around an isolated airfoil in low-speed, subsonic, transonic or supersonic regime by numerically solving the Reynolds averaged Navier-Stokes (RANS) equations using mature computational fluid dynamics (CFD) method. As postprocess results, the aerodynamic parameters of the airfoil, e.g., lift coefficient and drag coefficient, can be integrated from the airflow distribution near wall boundary. In addition, the coupling between airflow and heat transfer and the effect of surface roughness on near wall flow are considered by this program, it can be used for engineering calculation of the friction drag and heat transfer coefficients on airfoil surface. RANSFOIL reads coordinates data from a 1D XYZ file which describes the grid points or control points on airfoil as only input, then outputs grid and solution files in 2D PLOT3D format to record grid coordinates and airflow data and a report file to show aerodynamic parameters.

CFD scientific software. Provides simulation of 3D CFD problem based on Quasi-Gas Dynamics approach with radiation processes token into account. Lots of spectral intervals are considered. Parallel MPI/OpenMP-based implementation is provided.

Open3DCFD is a CFD solver for compressible flows in thermodynamic nonequilibrium migrated from FORTRAN to an object-oriented C++ environment.

This is my attempt to update AeroFoam to make it available for use under OpenFOAM-1.7x ! Site under construction! Please follow http://www.cfd-online.com/Forums/openfoam/82876-hypersonic-cfd-free-code.html

This project consists of two python based parts, ParaPost and TurboVTK, in order to post process Turbomachinery CFD results with ParaView and VTK.

CFDtools is a set of libraries to manage data format for CFD (mesh/grid and flow data). It provides additional tools for development of simulations softwares.

Interactive mesh creation tool. Discretizer will create geometry and meshes for three dimensional flow simulations (CFD). Geometry import is not a goal: Discretizer will be furiously fast geometry builder(on many common engineering applications at least)

Flowlive is a CFD (Computational Fluid Dynamics) program with a special focus on multiphase flow with a Euler-Lagrange model.

Golp is an easy-to-use property class library for CFD&NHT programs. Golp is not, but more than a property database, it provides thermodynamics and thermophysical properties by generic interfaces. The classes can also be built as COM and python modules.

HYP CFD is a structured, 3-D Navier-Stokes, MPI parallel multi-block computational fluid dynamics program for fluid thermophysics research, and high speed aerospace vehicle and propulsion applications.

Hephaestus is a computational framework to be used for iterative solution programs, such as weather models or CFD applications. (Now in need of an administrator/developers).

LuaLB is an open-source parallelizable lattice Boltzmann simulation for computational fluid dynamics with Lua scripting.

MagCAD is a set of tools for reconstructing 3D meshes from medical images such as MRI scans and ultra-sound. Resulting meshes are designed for CFD and visualisation