Search Results for "pyserial"

Block that receives a " message" and send string values over serial connection, to control hardware devices ( switch ), for example, via Arduino based controller ( see https://sourceforge.net/projects/ardu-switch/ ) Prerequisite: pyserial Build as usual for a Gnuradio block: - download and unpack - cd gr-message_to serial - mkdir build && cd build - cmake .. && make - sudo make install && ldconfig If successful this block is into OOT section... Enjoy ;-)

...It supports Modbus RTU and TCP, includes a built-in bus monitor for examining all traffic on the bus, and can be run as a Python module or as a standalone GUI (Windows only — unzip and run, no installation required). pyModSlave is based on modbus-tk, pySerial, and PyQt5. The repository has moved to GitHub: https://github.com/elbarbas/pyModSlave. SourceForge will continue to host updated binary releases, but the latest source code is maintained on GitHub. PyPI: https://pypi.org/project/pyModSlave/ Related project: QModMaster https://github.com/elbarbas/QModMaster — a Modbus master application Video demos: - Modbus RTU: https://youtu.be/1get1ELKz_A - Modbus TCP: https://youtu.be/nX_kTQwK2f4 - Session: https://youtu.be/y_9Di7E3y8w - Log: https://youtu.be/Xcb6sj1uzyY

...you can use it for anythink else. you can add/change some presetted commands modifying wxBinTermCommands.py dictionnary written in python 2.7.9 : https://www.python.org/ need pyserial : http://sourceforge.net/projects/pyserial/ need wxpython : http://www.wxpython.org/ Gui build with wxFormBuilder (but not need to execute) : http://sourceforge.net/projects/wxformbuilder/ tested on Linux, WinXP, Win7 copyright 2015 Jean Ingrasciotta ginoingras@gmail.com

...MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.

Use of USB to Serial and USB to Parallel BUS CONVERTERS available from ElectronicBRICKS at http://electronicbricks.blogspot.com/search/label/usb-Brick.

A Python/PyGTK based terminal emulation program like Procomm for configuring serial devices like routers, switches, phone systems, etc. Serial back-end through PySerial, Expect-like scripting through pExpect. What else? I could really use your help!