Search Results for "linux serial"

Block that receives a " message" and send string values over serial connection, to control hardware devices ( switch ), for example, via Arduino based controller ( see https://sourceforge.net/projects/ardu-switch/ ) Prerequisite: pyserial Build as usual for a Gnuradio block: - download and unpack - cd gr-message_to serial - mkdir build && cd build - cmake .. && make - sudo make install && ldconfig If successful this block is into OOT section... Enjoy ;-)

wxBinTerm, a binary serial terminal ------------------------------------------------------------------ V1.0.0 initial release, ... This serial terminal is initially made to send parameters to Reiner Serial Printer JetStamp 791. It is able to send data in HexaDecimal/Decimal/ASCII format on serial com port. you can use it for anythink else. you can add/change some presetted commands modifying wxBinTermCommands.py dictionnary written in python 2.7.9 : https://www.python.org/ need pyserial : http://sourceforge.net/projects/pyserial/ need wxpython : http://www.wxpython.org/ Gui build with wxFormBuilder (but not need to execute) : http://sourceforge.net/projects/wxformbuilder/ tested on Linux, WinXP, Win7 copyright 2015 Jean Ingrasciotta ginoingras@gmail.com

...Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.

This project aims to create an automatically tuned loop antenna for the shortwave bands. The implementation is based around an AVR microcontroller. The interface is controlled via a serial interface. The aim is to create an android app to control the antenna via a rs232 ttl to bluetooth converter.

Rigserve implements a human-readable control language for remote or local IP access to amateur radio equipment (rigs). A Python class library allows interfacing with a large number of rig types via serial ports or other methods.

This is an implementation of the ymodem protocol for serial transfer of data implemented using python.

Use of USB to Serial and USB to Parallel BUS CONVERTERS available from ElectronicBRICKS at http://electronicbricks.blogspot.com/search/label/usb-Brick.

"dBird Notifier" (with interactive pop-up tray icon) shows incoming messages of the following types: email (thunderbird), twitter and icq (pidgin) - both visually with system message and RGB-LED attached to serial/usb port (hardware details included)

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

A Python/PyGTK based terminal emulation program like Procomm for configuring serial devices like routers, switches, phone systems, etc. Serial back-end through PySerial, Expect-like scripting through pExpect. What else? I could really use your help!

Affix - The most powerfull Bluetooth protocol stack for Linux. Affix offers support for wide range of Bluetooth devices of PCMCIA, USB and serial type. Includes powerfull command line utilites, OBEX support, personal access point and SDP server.

GunStamp is a program which can be used where ever accurate timestamping of events are required. What it does, is to syncronize the computer clock to an external time source (a GPS) connected to a serial port, and then use this clock to timestamp events.