Search Results for "antenna"

...Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection-molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing the transmission of radio signals. You are responsible for using your HackRF One legally.

Small Portable Rotator: a simple, lightweight, self-consistent antenna rotator for amateur radio satellite tracking, plus an optional portable controller. *** CHANGELOG *** [version 1.0]: - Added tighter control over rotation limits - Fixed some minor bugs - With the 'V' command the version is displayed and no longer the "built filename"

Arduino Mega 2560 Code with a standard Ethernet Shield that drives Relays to control a MFJ-993b Autotuner remotely. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine pinouts to the MFJ-993b DB9 yourself. ...

...It features an OLED display providing real-time frequency readout and received signal strength indication (RSSI), presented numerically in dBm, as an S-meter value, and via a graphical bar. The system supports direction-finding applications, with provision for a compact 4-element Yagi antenna to enhance signal localisation. CODE FOR THIS PROJECT HAS NOW BEEN RELEASED. Download the Arduino Sketch from the Files section. 27/06/26 - NEW Version Released with configuration Web GUI https://youtube.com/shorts/7QMwPYFFLZA If you are new to ARDUINO, then please download the 'Quick Start Guide' from the File section.

Gpredict is a real-time satellite tracking and orbit prediction application. Gpredict can track an unlimited number of satellites and display the data in tables and various graphical view.

finds exact gain, directivity and input impedance of Yagi or log-periodic antennas (planar symmetric array of cylindrical dipoles, many driven elements) for a range of specified frequencies, integrates 2D for segments on the same element, moment method

The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application....

The SARK100 SWR Analyzer (https://sites.google.com/view/sark100) is a measurement instrument which determines antenna system performance across the HF/6M amateur bands through use of automatically collected SWR and complex impedance readings.

XBEL-Antenna is a RSS reader and a web site watcher.

This is a port of PICAXE-28X BASIC software written by Jim Tregellas VK5JST for his Antenna Analyser project to C for PIC16F873A. The project can be compiled using a free edition of B Knudsen Data CC5X C compiler and MPLAB IDE assembler/linker