Search Results for "tuner"

Echoes it's a radio spectral analysis software for SDR devices, designed for meteor scattering purposes. The older releases supported only RTL-SDR devices. They are very cheap SDR based on DVB-T TV tuner dongles based on Realtek's RTL2832U chipset. Starting from 0.50 Echoes embeds SoapySDR allowing the support of many other SDRs. Echoes doesn't demodulate neither decode any human-made signal. Its main goal is to analyze and record the total power of natural signals and generate screenshots and tabular data (CSV,) output in presence of particular peaks in a selected narrow range of frequencies. ...

Arduino Mega 2560 Code with a standard Ethernet Shield that drives Relays to control a MFJ-993b Autotuner remotely. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine...

The DZS3000NV is a small form factor and cost-effective satellite HD set-top box based on the BCM7358 processor. It supports one satellite tuner/LNB, two USB ports, a HDMI port, an Ethernet port, IR communication and a single front-panel LED and a standby button.

The Sky Deutschland DS830NP is a HD (MPEG-2/MPEG-4) set-top box decoder with the following features: One DVB-S2 satellite tuner HDMI, USB, Ethernet, SCART and SPDIF outputs Dolby Digital Plus built-in codec Cisco conditional access support

...This allows subscribers to have the basic benefits of HD content in their home at no cost from over-the-air channels, as well as allow for a limited number of basic cable channels to be displayed in HD without the additional cost of an advanced STB. +Features single 54 to 1002 MHz digital video tuner +Provides digital video (64 QAM/256QAM) +Offers MPEG-2 and MPEG-4 digital standard definition and high definition video processor +Delivers accelerated 2-D graphics +Includes integrated graphical user interface

...The DTA100 makes it possible for video service subscribers to keep watching their analog TVs even when connected to an all-digital cable network—this allows the service provider to recover analog bandwidth in order to launch additional, enhanced digital services such as HDTV. Consistent with the current analog subscriber's experience, the ARRIS DTA100 features unidirectional functionality, a single in-band tuner, standard definition decoding capabilities and a basic user interface for accessing one-way digital services. +Provides single 54 to 864 MHz all-digital tuner +Includes full inband +Delivers DSM-CC support for code download +Offers one-way device +Features front panel IR receiver and power LED

L-Tuner Simulator is a small application to calculate the input impedance of the L matching network, the impedance of the load (cables + antenna), or to find the Antenna impedance giving the cable length. It was inspired by my MFJ-929 Auto-Tuner.

A Linux GUI for the iRiver iFP flash portable player. This app is similar to the iRiver Manager for Windows. iFP-GUI supports upload, download, delete, rename, device status (like battery status, etc.), tuner, and playlist uploads.

gtk+ 2 client for XM Satellite Radio\\\\\\\'s XMPCR tuner.