Search Results for "esp32"

OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA. OpenMQTTGateway supports very mature technologies like basic 433mhz/315mhz protocols & infrared (IR) so you can make your old dumb devices "smart" and avoid throwing them away. ...

This project is intended to be coupled with my other LoRa board based project, 70cm Ham Radio Fox Hunt Beacon, which can be found at the link below: https://lora-ham-fox-hunt-beacon-70cm.sourceforge.io The receiver, also ESP32 LoRa-based, is designed for simplicity and accessibility, requiring minimal user setup. It features an OLED display providing real-time frequency readout and received signal strength indication (RSSI), presented numerically in dBm, as an S-meter value, and via a graphical bar. The system supports direction-finding applications, with provision for a compact 4-element Yagi antenna to enhance signal localisation. ...

Espressif ESPx WiFi Connection manager with fallback web configuration portal. The configuration portal is of the captive variety, so on various devices it will present the configuration dialogue as soon as you connect to the created access point. When your ESP starts up, it sets it up in Station mode and tries to connect to a previously saved Access Point. If this is unsuccessful (or no previous network saved) it moves the ESP into Access Point mode and spins up a DNS and WebServer (default...

...Op Note 2: You will need determine pinouts to the MFJ-993b DB9 yourself. This is easy to determine; refer to the manual at https://mfjenterprises.com/products/mfj-993b#product-manuals *Note for ESP32* See https://github.com/dl9sec/MFJ-993WWRC for working with ESP32 modules. It works very well with the MFJ-993B and is a great project! Opto-Isolators are recommended rather than FETs ! Enhancements to this may appear that include additional functionality that this project incorporates.

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. ...