Search Results for "vb.net serial port"

The Linux null-modem emulator (tty0tty) is a kernel-module virtual serial port driver for Linux. This create virtual tty ports pairs and use any pair to connect one tty serial port based application to another. There are a version using pseudo-terminal (UNIX 98 style).

This project is no longer actively developed on SourceForge. Its development has been fully moved to https://github.com/acerion/cwdaemon on 2024.08.03. ------ cwdaemon is a small daemon which uses the PC parallel or serial port and a simple transistor switch to output morse code to a transmitter from a text message sent to it via the udp internet protocol. The program uses the soundcard or PC speaker to generate a sidetone. Current version of cwdaemon is 0.12.0, it has been released in May...

sercd is an RFC 2217-compliant serial port redirector. It lets you share a serial port through a network. It is based on sredird. The RFC2217 protocol is an extension to telnet and allows changing communication port parameters.

A real-time serial port device driver, works with RT-Linux and RTAI.

CCOM - a lib for serial port interface

... serial port emulator with software like Stellarium, to control the network exported telescopes. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control. It can publish the service using mDNS as XXX._nexbridge._tcp.local. where XXX is user specified name with "-s" option. Now ttynet tool is added which connects a virtual serial port to a network exported serial port.

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

This software is a interface that show in a website values sent by Microcontroller through serial port. It is for Windows and its developed in C. There is a example with PIC Microcontroller. Este software es una interfaz que muestra en una página web valores enviados por un Micrcontrolador través del puerto serie. Es para windows y está desarrollado en C. Hay un ejemplo con un Microcontrolador PIC. http://galeon.com/luismorquecho

a simple c program for an serial elbug = electronic morse key.which is to be plugged to the serial port, its output is also a pin in the serial port. Just compile it by 'gcc elbug.c -o elbug' or use the ready-compiled file and copy elbug to user/local/bin. /* Call it as root. */ How to cable your homebrew elbug? Middle pad: +9V battery via Resistor 2k Left contact: -> DCD (9-pin plug: 1) (25-pin plug: 8) Right contact: -> CTS (9-pin plug: 8) (25-pin plug: 5) Ground: -pole...

Apple Disk Transfer is a set of programs to transfer Apple ][ disks from a vintage Apple ][ to a PC or Mac using a serial port.

A server that allows read and write access to serial port through TCP protocol.

Gcomm is a serial communications program similar to seyon, but more modern, and easier to use. Works over serial port, via TCP/IP, or a pipe through another program. Supports xmodem/ymodem/zmodem protocols. Visit the gcomm.sourceforge.net home page for

FUNterm is a serial port terminal program for Windows. It offers basic serial connection. Because FUNterm is written using basic Win32 calls, with no high-level libraries, it works under Linux using Wine. The serial driver can be used separately.

Ponticulus (a virtual COM-port over TCP/IP redirector) allows synchronous connecting and disconnecting to a remote serial port (e.g. on an embedded device). It was initially based on com2tcp, part of the com0com project. (http://com0com.sourceforge.net/)

Serial line sniffer (slsnif). slsnif is a serial port logging utility. It listens to the specified serial port and logs all data going through this port in both directions.

SAM (Servo Actuation Manipulator) is a GTK+ based X windows application for controlling anywhere from 1 to 254(so far) servo motors via a serial port connection, specifically this program was made for the Scott Edwards Electronics Mini SSC II.

TourViewer can send, receive and evaluate CicloSport(C) HAC4 and CM 414 M/CM 436 M data through the serial port. It can show statistics, tables of data and graphs. TourViewer runs on PalmOS.

Panasonic Plasma TV Controller. This program enables you to control the TH-42PWD7UY TV and similar TVs like the TH-42PHD7UY , TH-37PWD7UY and the TH-50PHD7UY through your RS-232C serial port from linux.

Libmodbus is a dynamic library to use Modbus dialog protocol with GNU/Linux. LibModbus include master, slave and also serial port configuration functions. GModbusControl is a simple tool tu use with libmodbus

Columbo Simple Serial Library is an easy to use, event driven serial port communication library for Linux.

Windows program to control your Sony DVP-CX777ES 400-disc DVD player via its RS232 port connected to the serial port of your computer. Includes documentation and all source.

DirecTV Web Remote is a web based remote control for DirecTV DSS receivers utilizing \'Low Speed Data\' port on back of the DSS and serial port on computer. Currently it supports only RCA 4th generation+ receivers, support for other receivers is planned

ttypatch is a Linux application that permits two or more "serial port user programs" to reliably connect to each other without the use of actual serial ports. Also acts as a virtual patch panel among any number of real and virtual serial ports.

The Dentist is a project that aims at providing an easy-to-use gui that enables Bluetooth connectivity. Some Bluetooth profiles will be included, such as Object Exchange (OBEX) Profile, Serial Port Profile (RFCOMM) and Personal Area Networking.

GunStamp is a program which can be used where ever accurate timestamping of events are required. What it does, is to syncronize the computer clock to an external time source (a GPS) connected to a serial port, and then use this clock to timestamp events.