Search Results for "input-leap"

This repository contains hardware designs and software for HackRF, a low-cost, open source Software Defined Radio platform. HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF...

Set of executable files for sending and receiving data / short multimedia files through a narrow bandwidth transmission media. The signal output to the transmitter is the sound card analog output socket while the received signal taken from the receiver is fed to a sound card analog input line. Targeted audience: * Short wave / long wave (narrow bandwidth) Amateur Radio enthusiasts * Experimenters of vintage transmission systems * People living in areas with absolutely no Internet and no 3G/4G/Edge access (only analog telephone or CB radio), so that peer-to-peer data sharing (or even broadcast to several peers at a time) are made possible...

Acarsdec is an open source, multi-channels realtime ACARS decoder for Linux. It features : - up to four channels decoded simultaneously - error detection AND correction - input from sound file , alsa sound card or software defined radio (SRD) via a rtl dongle (http://sdr.osmocom.org/trac/wiki/rtl-sdr) or airspy (http://www.airspy.com) - could send decoded acars to a server via UDP in planeploter format or its own dedicated format. The 4 channels decoding is particularly useful with the rtl dongle. ...

Command-line tool to decode text which has undergone MIME-typical encoding into (ISO-8859) 8-bit --- without having or parsing the relevant MIME type declarations. Decodes quoted-printable sequences; handles UTF-8, UTF-16BE, UTF-16LE; optionally translates common characters from DOS or Windows code pages or HP-Roman8 into ISO-8859-1. UCS characters can be mapped to 8-bit translation strings. Single ISO C source file, "8conv.c". Translation can be controlled through a...

This program will read a file (or stdin) containing a list of AT commands. Each command will be send to the modem, and all the response for the command will be output to file (or stdout). Example, to hang up any ongoing call: $ echo ATH | atinout - /dev/ttyACM0 - ATH OK $

...Has a powerful web browser coding engine. We make life easy for anyone with no design experience as well as designers and developers with long web design experience. All you have to do is input your artistic design. Go to uFastweb.com and download your copy to try. It is a portable program so does not even need the normal installation, just click and go.

dbacl is a general purpose digramic Bayesian text classifier. It can learn text documents you provide, and then compare new input with the learned categories. It can be used for spam filtering, or within your own shell scripts. Sometimes it plays che

Keeon , keep the interactive connection to internet or other device on by sending unused chars frequently. It create a pty for the interactive program and send chars to the pty like robots if no input from the user entered. Now telnet and ssh are

nohandcom is an accessibility software running on mobile devices like smartphones and PDAs that allows physically handicapped users complete access to all device functionality by emulating either key or touchscreen input.

OpenAL mixer aims to provide a multiplatform API built on top of OpenAL to get/set volume values (including support for capture devices) and list, select and mute input and output lines.

Korallenriff is a program that collects input from different network sources and stores their data into one database. For example, it can receive POP3 mail or can fetch NNTP groups and store the received messages in a database.

A generic filter "front end" that does the following: reads standard input and sends it through a socket to a specified host and port number; receives data back from the socket and writes it to standard output.

Convert text to International Morse Code. Input is ASCII text. Output can be: - . -..- - on the console, raw 8bit PCM suitable for piping to /dev/audio, .wav files or even (mp3|ogg). Good for headlines on your MP3 player or code practice.

BashBot is a open source IRC bot that does raw commands and bash commands through input on IRC. It is easily extensible even to the beginning programmer. This was originally an example of sockets use in Linux. I have recently added Bash command support.

Simple T9/TAP-9 support lib/obj for alpha-numeric input with phone keypad. Supports 4 modes: Upper, Lower, Initials, Numeric. Input matrix is programmable at compile time. Tested on Linux, WinCE, and Symbian S60.

basE91 is an advanced method for encoding binary data as ASCII characters. It is similar to UUencode or base64, but is more efficient. The overhead produced by basE91 depends on the input data. It amounts at most to 23% and can range down to 14%.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

Utility for manipulation of mails in the traditional UNIX mailbox format, joining/sorting several input mailbox files and writing resulting data in a separate mailbox.

General line based buffer with backlog written in "C". It supports multiple input and a single output. I/O modules: TCP/IP, UDP/IP, Unix sockets, File/Pipe. It supports backlog writing (and resume) so a failsafe transport-buffer can be build.

A simple but fully-featured implementation of the simple Caesar Cipher encryption algorithm, specifically 'rot13' - Caesar with a factor of 13. Supports file and tty input/output, internationalisation, and also includes a shared library.

mboxiter is a simple unix tool to iterate a command FOO over each rfc822 message in the common unix mailbox format, feeding one message at a time to the standard input of the command FOO.

Powerful encoder/decoder for the newly popular Usenet yEnc file format. Features include easy configuration, internationalization, memory efficiency, and an intelligent decoder capable of finding and decoding input files, including out-of-order files.

Flat File Editor is useful for viewing large fixed-length files that have a well defined record layout. The record layout can be specified such that different fields (corresponding to column positions within the input file) can be placed anywhere on the

Iphoneim is an input method for iphone. The goal is to provide an input method for unsupported languages, such as Korean.