Search Results for "time frequency toolbox"

═══════════ ▲▲▲ ══════════════════════════════════════════════ Find the various versions on the "Files" tab (https://sourceforge.net/projects/wsjt-x-improved/files/) wsjt-x_improved is an enhanced version ("the DG2YCB edition") of the excellent WSJT-X software by Joe Taylor K1JT, Steve Franke K9AN, Bill Somerville G4WJS, me and others (https://sourceforge.net/projects/wsjt/). Sometimes, however, even good things can be improved … Notes: wsjt-x_improved is experimental and is...

Fldigi is a modem program for most of the digital modes used by radio amateurs today: CW, PSK, MFSK, RTTY, Hell, DominoEX, Olivia, and Throb are all supported. It can help calibrate a sound card to a time signal and do frequency measurement tests. NOTICE: You must proceed to the Files section to locate the correct fldigi, flrig etal download for your particular operating system. Do not blithely use the big green Download button! Use the "Files" menu item or the "Browse All Files" link.

Filt8 - v3.6 release - Requires Python 3.x (3.10 or higher on Mac) Scrollable maps for small screens State data as of Feb 25, 2024. Map saves settings. Map features: filter by band, click to Lookup. Offline Maps to show station grid locations as you decode them in real-time (Check out js8mapper project on https://sourceforge.net/projects/js8map/ for this same option for JS8Call) Map feature allows filtering by band, listings by callsigns or grids, and callsign lookups via QRZ...

... station (NCS) listens to each band in the same sequence, starting at the same designated time. In the second half of the ten minute cycle, the remote site becomes the listener and the NCS transmits a text message on the band where the remote site's signal was strongest. Both stations then switch to that frequency and start operating. If more than two stations in the net, the other stations can use the tool in Listener mode, and switch to the band announced by the NCS at the end of the sequence.

This project contains the working artifacts for the development of the Energistics Transfer Protocol. There is NO Wiki. To review documentation, clone or download the repository and look in the documentation directory. You can access on line using the [Browse Code] button.

Morse View an open source software project to convert audible Morse codes to text messages. This application is capable to convert Morse codes from wave files or from the audio line/microphone inputs. Conversion from Morse code to text can perform based amplitude and frequency decomposition of the input audio stream.

Decoding the (german) DCF77 time signal per USB sound card and a receiver module, setting the system time. "U" stands for USB and "77,5" for the full 77.5 kHz frequency of the time signal.

The Craft Machine is a small PHP program to help craft show organizers accept applications over the internet. The program can handle more than one show at a time, allowing the installation to be shared among multiple groups.

Spamdot is a win32 tool to poll a user-specified list of web servers. The polling frequency is adjusted according to the response time of each server so that slower servers are polled less often. Response time and other 'interesting' info is displayed.

Tracks runner's in/out time at each aid station. Saves data in CSV file. Can be configured for other races. AidStations.txt in repository contains the 15 or so Aid Stations used for the Bear100. The Bear100 is an annual 100 mile, 2 day race on foot through the Rocky Mountains in North America. Will communicate via serial over a 1200 baud AX.25 link to a ARES/Data backend (which we call NetControl). Can initialize some hardware TNCs with parameters optimal for ARES/Data topology. See ARES...