Search Results for "lora"

...MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA. OpenMQTTGateway supports very mature technologies like basic 433mhz/315mhz protocols & infrared (IR) so you can make your old dumb devices "smart" and avoid throwing them away. These devices also have the advantage of having a lower cost compared to Zwave or more sophisticated protocols. OMG also supports up-to-date technologies like Bluetooth Low Energy (BLE) or LORA.

Wifi & Bluetooth driven, LoRaWAN enabled, battery-powered mini Paxcounter built on cheap ESP32 LoRa IoT boards. Paxcounter is an ESP32 MCU-based device for metering passenger flows in real time. It counts how many mobile devices are around. This gives an estimation of how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC addresses. The intention of this project is to do this without intrusion in privacy: You don't need to track people-owned devices if you just want to count them. ...

PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. PJON has been engineered to have a variable footprint (4.2-8.2 kB program memory) and overhead (5-35 bytes per packet) depending on its configuration.

This application is designed for a bi-directional data exchange between IOT platforms connected through a LoRa RF link and a centralised processing facility connected to a LAN through an UDP link. It can run on any hardware platform hosting a Semtech LoRa module connected through a serial link and a network adapter. It has been designed to run on the Libelium Meshlium platform but is also compatible with Windows and Linux operating systems.