Search Results for "so"

...The threading cycle uses the G76 command with some parameters. This program lets the user select from hundreds of predefined or free definable thread standards and calculates the parameters for the Mach3 command line. So, essentially just select your thread, calculate it, copy & paste the result to a GCode file, hit "Cycle start" and you get exactly what you want. Also included is a little tool to calculate the pitch diameter of a thread based on a measurement with three wires. Supports the threading standards M, G, R, BSW, BSF, UNC, UNF, UNEF and tapered Pipe R/Rc and Metrical threads. ...

...The target users will layout their design and then immediately generate CNC code. The goal is a design application closer to Adobe Illustrator than to AutoCAD. The user specifies machining aspects during object creation so that when the design/layout phase is completed the toolpath generation can occur automatically. What is 2.5D? Objects created are flat (2D) but have a depth component. So you can create a square that will be machined at a specific depth but the depth will be constant accross the square. It is not/does not: A general purpose CAD (AutoCAD) type program. ...

...Using the G code file, you can mill a PCB using a CNC milling machine. This software was developed to help and to speed up the manufacturing process of a PCB prototype. Using this software, you will be able to build your so expected project, extracted both from a magazine or from the Internet, which needs a PCB to be produced, without any complicated CAD software. Try out this software, and you will be glad about the results.

...You can use it simulating X Y Z coordinate CNC with out G code. It maybe use to axle running one straight line, as this straight path as the CNC linear motion system. This is the first software of me, so it may have alots of mistakes of code or others application problem, email to me: bywetech@foxmail.com Please reads OpenSCAD Manual at firstly. There have two parts of model build. First is build Manipulator(Industrial Robotic arm) axle rotate motion model. This have writed in source code, you can changing datas in gmp16.h. ...