Search Results for "mfc file class"

The EdytorNC project now consists of four applications that can be useful for programming and operating CNC machine tools. EditorNC is a specialised text editor for CNC programmers. FTPserver is a simple FTP server for transferring cnc programs to and from the machine. SerialPortFileServer is a simple server for transferring cnc programmes to and from the machine via RS232 ports. ProgramManager is a program that makes it easy to search for cnc programs based on, for example, part...

4.4BSD-based UNIX-like operating system for CNC / machine control applications. Using low-cost hardware, FabBSD can be used to control a wide array of CNC milling machines, lathes, routers, process-control and automation equipment.

Cnc's IP Data Volume Report: Logs IP to IP contact, number of packets, bytes, time of contact, Ethernet too! View via local web interface. Very simple for those who want to view who your computer is contacting the most!

Now you can translate your vectorial and bitmap design data to your CNC machines! OpenCAM provides an interface where you can configure your CNC equipment and then export the file followiing it's commands! You can export PS,PDF,AI,EPS,DXF,SVG and Bitmap

FTP BNC. File Transfer Protocol Bouncer. Allows Any one to setup a Bouncer to a ftp server. Uses, mask the real identity of a ftp server, provide link over lans running NAT or etc. Proxy and FXP modes. Commands, or commands and data in proxy, data in FXP

Project aim is to translate RS274X files such that it is easy to use the RS274X file content to automaticly program a home made CNC milling machine to mill Printed circuit boards.

Red CNC is an Android application to allow control of the 3D routing machine by the same name. It allows the user to configure the machine properties, such as workable volume, tool size, etc. Once set, the user loads a G-Code file and gets a 3D view of the tool path. Lastly, the user can then start processing the job by sending commands to an Arduino.