Search Results for "classroom control software"

motion 5 is a specialised variant of GRBL which is focused on motion of up to five CNC axes and laser processing instead of milling. It supports ATMega MCUs running with up to 20 MHz and provides jitter-free pulses with a frequency of up to 38 kHz. Wherever usage and handling of motion5 is different to original GRBL, this is described in Wiki. For the G-code commands please note that motion5 supports more axes which are named "A" and "B". So a GRBL-command "G1X10.0Y20.0Z10.0" which moves...

APTOS is an open source Apt translator project. It consists of several CAM applications, based on the Apt programming language. It is used to create control programs for cnc mills, lathes, water jets, lasers, and other industrial equipment.

The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters.

Universal CNC for COM port. It's software to control CNC using arduino board(RC servo+Encoders). It has build in CAM software.

...Goal is to provide easy way to calculate point coordinates for pipe (tube) cutting where each end of produced tube needs to fit to some round or planar surface (in most case, next step is welding produced tube to that surfaces). G CODE produced can be used directly (in most cases) as input to some CNC machine control software. Or you can easily use (cut&copy) calculated paths and use it in your own G CODE file. This application is portable, it does not write anything to registry (or anywhere else). This app does not 'phone home' or collect any user information in any way. Just download file and place it anywhere on HD (we recommend simple location like 'C:\Tube3D\...' or similar simple path.

GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates..

Программа обеспечивает импорт разных форматов файлов и обработку по ним на станке ЧПУ.

A complete CNC controller, host software and CAM processor

Software to control an Open Source Hardware CNC based on Qt

This software is used to create and modify machine programs for EMCO Compact 5 and Control T.U. CNC-2A lathes and to send / received them between PC and machine over serial connection and ethernet using a converter (like lantronix XPort).

XinCNC is a free software for Computer Numerical Control (CNC).

The freec project is built for cnc system (pcnc), which is under linus OS. the software can be run in PC or IPC to control lather or mill machine through pci card. and the sametime the freec-pci card is under development.

Tinymotion is an dedicated motion control hardware/software combo for cnc machine control applications. http://www.tinycontrols.com