Search Results for "serial port redirection tcp"

This project provides a proxy that allows telnet/tcp connections to be made to serial ports on a machine.

This software designed to bypass Deep Packet Inspection systems found in many Internet Service Providers which block access to certain websites. It handles DPI connected using optical splitter or port mirroring (Passive DPI) which do not block any data but just replying faster than requested destination, and Active DPI connected in sequence. These scripts launch GoodbyeDPI in recommended mode with DNS resolver redirection to Yandex DNS on non-standard port (to prevent DNS poisoning). To check...

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

This library implements the serial commands supported by the Celestron NexStar hand control (HC) and SkyWatcher/Orion SynScan HC. This applies to the Celestron: NexStar GPS, NexStar GPS-SA, NexStar iSeries, NexStar SE Series, NexStar GT, CPC, SLT, Advanced-VX, Advanced-GT, CGE, CGEM etc. SkyWatcher: EQ5, HEQ5, EQ6 (Pro), AZ-EQ5 GT, AZ-EQ6 GT, EQ8 etc. and the corresponding Orion mounts. Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port...

The Null-modem emulator (com0com) is a kernel-mode virtual serial port driver for Windows. You can create an unlimited number of virtual COM port pairs and use any pair to connect one COM port based application to another. The HUB for communications (hub4com) allows to receive data and signals from one COM or TCP port, modify and send it to a number of other COM or TCP ports and vice versa.

This project is an enhanced version of ser2net, a proxy that allows telnet/tcp connections to be made to serial ports on a machine.

A server that allows read and write access to serial port through TCP protocol.

Gcomm is a serial communications program similar to seyon, but more modern, and easier to use. Works over serial port, via TCP/IP, or a pipe through another program. Supports xmodem/ymodem/zmodem protocols. Visit the gcomm.sourceforge.net home page for

This is an application proxy that let communicate with pipes/serial port(rs232 rs485)/tcp/ip and potencially all devices in a host computer via tpc/ip sockets. It sopport multicast and communication issolation.

Ponticulus (a virtual COM-port over TCP/IP redirector) allows synchronous connecting and disconnecting to a remote serial port (e.g. on an embedded device). It was initially based on com2tcp, part of the com0com project. (http://com0com.sourceforge.net/)

tcp2com creates a bridge between a TCP socket and a serial port (COM). The program runs as a service under Windows NT. With tcp2com, you can telnet into any device you may have plugged into your COM port.