Search Results for "remote host"

BWPing is a tool to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism. It does not require any special software on the remote host. The only requirement is the ability to respond on ICMP echo request messages. BWPing supports both IPv4 and IPv6 networks.

DBD2 inserts database records from TCP input. It is a companion project to Syslgod2 and an application in its own right. It ships with a backgrounding client for generic use. The client sends whatever information the user puts on the command-line to the back-end daemon via TCP. Upon successful transmission, the client exits. On failure, it backs off and retries until its life-time timer expires. The back-end daemon accepts data from Syslogd2 or its own client and inserts that data...

...NO BINARY RELEASES! To make use of this driver, you need to edit the hardcoded IP address of the remote host you wish to connect, compile the driver code with Pasmo assembler, run FIDCSUM on it and copy the final binary to your bootable disk. Caveats: - Only 16MB disk images are supported. - All errors are non-recoverable and require hardware reset.

lterm is a vte-based terminal emulator for GNU/Linux systems. It is mainly used as SSH/Telnet client but can be very easily configured to use any other protocol. Furthermore it can be a usual terminal on local host. Includes some features in order to ease user's work, avoid repetitive tasks and improve speed in operations, see a list below.

...It introduced a simple script language called Ducky Script, which this project uses too. The ESP8266 is a popular Wi-Fi chip used in a lot of projects. Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine.

...You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.

SkyEye is a very fast full system simulator which takes llvm as IR of dynmic compiled framework.. It can simulate series ARM, Coldfire,Mips, Powerpc, Sparc, x86, TI DSP and Blackfin DSP Processor. Also can simulate multicore system by the multicore of host. The commercial support is provided by DigiProto Co. (http://www.digiproto.com)

nrpe_nt is a windows version of the nrpe (Nagios Remote Plugin Executor) daemon for unix-like operation systems. It provides methods to execute Nagios service checks on a windows host and report the results back to your Nagios host.

RIFSNIFF lets you capture packets over a remote host's interface, running server application, and read them from a virtual TUN/TAP interface on the client host. Packets are sent as the payload of a plain TCP session.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

RPCAP is a Remote Packet Capture system. It provides a libpcap-compatible client library which when linked with a user program running on a client system, initiates and controls a network sniffer RPC service running on a remote host.

LUD, LuValley-based Unified Desktop, tries to create a unified virtual desktop for X11 based on VMMs, such as LuValley and KVM etc.. By LUD, a user can manage windows from different VMs (local or remote) as well as the windows of the host desktop.

The program `pexec` executes parallely the given command or shell script on the local host or on remote hosts, while some of the execution parameters, namely the redirected standard input, output or error and environmental variables can be varied.

proxyconnect send HTTP CONNECT request to HTTP proxy to build transparent tunnel between its stdin/stdout and dedicated port on remote host. can be used to provide proxy support for SSH by adding a ProxyCommand directive in ssh_config.

(serial ports on) steroids enables users to execute remote c functions in python shell over serial interface. It generates c code for the target and a python script for the host automatically from a c header file.

iPathmeter is a measurement tool useful for estimating the Capacity and Available bandwidth of a network path. Its novelty is that it does the estimation NON-COOPERATIVELY, ie, it does not require any cooperation from remote host in making the estimations

Linium Realms is a 2D Multiplayer Online RPG using SDL. It has a really nice Level editor and a strong NPC Programming system. All players will be able to host and create their own worlds and manage it with a remote control with multiple level access

nrpe_vms is an OpenVMS version of the nrpe (Nagios Remote Plugin Executor) daemon for unix-like operation systems. It provides methods to execute Nagios service checks on an OpenVMS system and report the results back to your Nagios host

An intelligent backup solution for smallscale backup needs. Support for both Windows & Linux Planned Features: Restore files from any date backed up. Burn archives to CD or transfer to remote host.

The goal of this project is to make a program (or a set of programs) to fully control a remote machine trought a TCP/IP network. The project consist on two parts: The host app to receive & interpret commands and a GUI to send the commands (the client).

The X Supervisor Extension is a patch for the popular XFree86 X server to make X11 forwarding with openSSH safer when the remote host can not be trusted.

The purpose of this program is to let people set up this program on a host computer and then from a remote computer, type commands into it through AIM and control many different functions, applications, etc.

The purpose of this project is to build a client-server application that will send summaries from Seti@Home clients distributed all across a network to a central host, allowing that way to a monitoring program to show results and statistics for multiple c

ICMP Shell (ISH) is a telnet-like protocol. It allows users to connect to a remote host and to open a shell using only ICMP to send and receive data. ICMP Shell was written in C for the UNIX environment.

sysman is a multiple-host administration shell inspired by VMS's SYSMAN. It allows you to connect to many hosts, execute a command or a shell script on all of them in parallel, and send files to them.