Search Results for "nfc card reader"

ChameleonMini is a portable, programmable NFC and RFID security research tool designed for analyzing, emulating, and cloning contactless smart cards. It operates as both hardware and firmware, allowing researchers to interact with NFC systems at a low level, including reading tags, emulating card behavior, and capturing radio frequency communication. The device is widely used in security testing, penetration testing, and academic research focused on wireless communication protocols and authentication systems. ...

Project: Icarus is a proof of concept model rocketry research project that brings several individual projects together into a single model rocketry research launch vehicle. This specific project includes an avionics payload, temperature sensors along the body, and a video camera. The sensors record the heat buildup inside the body tube as the solid rocket motor burns and fires the ejection charge. The sensors are placed in three different locations along the body tube to provide data on the...

If you do a search for model rocket electronic payload, you will see a lot of entries for medium to high power, large diameter rockets. These types of rockets are large, typically 80mm (3.1 inches) in diameter or larger. These rockets are flown in large open areas, often deserts and dry lake beds. These larger rockets also use larger propellants, typically in the High Power Rocketry (HPR) range of “H” and above impulse level. Not only do these motors require you to be certified in HPR, the...

L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card.

SIMCardManager is Windows tool that can read a SIM card information (ICCID, IMSI, Pin states) and SIM card content : phone book (ADN), Fixed dialing (FDN) and SMS messages. It also enables you to authenticate with PIN when activated and export SIM card content to text files. You need to have a PC/SC compatible smart card reader or dongle with SIM slot. You can find other useful tools on my website http://www.idrix.fr

...System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

This project provides a chip card interface device driver for the PC/SC Lite server deamon (pcscd). The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.

Dexux allows a DexDrive, a Playstation memory card reader, to be used under Linux. We expect that mostly full functionality exists, but that it can be hard to use for end users. N64 DexDrive support is planned.